WHICH BLADE TO USE. In general, select a blade which will allow at least two teeth to be engaged in. The hi-speed steel blades stay sharp longer than alloy steel blades. With the saw running, apply the wax momentarily to both sides of the blade.
how to change blade on porter cable band saw Related Question:
Which direction does a band saw blade go?
On a typical wood or metal cutting blade the hook or of point of the blade should be pointing down for a vertical blade bandsaw, or for a horizontal blade saw the hook of the teeth should be pointed such that they enter the workpiece first as the blade moves.
Why do bandsaw blades break?
Machine Defects Even the best blades can fail if there is something else wrong with your bandsaw, and even a small misalignment of bearings or guides can put a twist in the blade as it goes around. Resulting in tension being applied in all the wrong ways which will lead to early breakage.
Why does my bandsaw blade keeps coming off?
Blade Tension Is Too Loose The most common reason why the blade is slipping off is that there isn’t enough tension to keep it on. Blades can slowly become loose after years of wear and tear, and eventually, you’ll need to tighten or replace them.
Can you flip a bandsaw blade inside out?
Just turn them inside out, it doesn’t make any difference. The only difference is what side they had up when they welded them. When I get blades from WM, they are ready to go on the mill.
What is the set on a bandsaw blade?
The pattern of tooth setting is “left/right/straight,” where the left and right teeth are for opening or cutting the material, and the straight one – the so-called raker tooth – is for removing sawdust from the timber. The recommended tooth-set values are different for each blade type and profile.
Can I put a wider blade on my bandsaw?
An 18-inch diameter wheel can use a 0.032-inch thick blade that is 3/4 inch wide. In general, thicker and wider blades will be the choice when sawing dense wood and woods with hard knots. Such wood needs the extra strength of a thicker, wide blade to avoid breaking. Thicker blades also deflect less when resawing.