On a typical wood or metal cutting blade the hook or of point of the blade should be pointing down for a vertical blade bandsaw, or for a horizontal blade saw the hook of the teeth should be pointed such that they enter the workpiece first as the blade moves. During regular cutting on a well set up bandsaw the blade will move or bow backwards a bit as you press the workpiece into it. The side guides will assist in keeping the blade cutting straight, but they are not an iron lock on the blade forcing it to cut straight.
What follows is how you install a vertical bandsaw blade. Remove the Blade: Pull blade from top wheel and clear the entire blade from the bandsaw. Regardless of the orientation, the blade direction remains the same; towards the work along the blade rotation.
Whether you’re a beginner or could just use a refresher, we’re going to walk you through the process for a perfect bandsaw blade adjustment setup every time, no matter what blade you install. Lower the upper blade guide, open the wheel housing(s) and blade guard and carefully remove the blade. So it should be no real shocker that you’ll encounter conflicting schools of thought regarding blade placement on the wheels and how it affects blade “Drift”.
New tooth designs on the market feature technology that dissipates force, especially heat, during cutting to substantially minimize tooth breakage and maximize saw blade life. Harmonic vibrations can lead to excessive noise, undesirable saw or saw blade vibrations, and, in severe cases, bad cuts. Properly breaking in a bimetal band saw blade ensures longer blade life, faster cuts for a longer period of time, and consistent performance.
In this Sawblade.com Tech Tip Video video, Austin Zimmeman from sawblade.com will explain what to do when the teeth of your band saw blade face the opposite direction. Customers are unaware that a simple flip of the wrists will have their saw blade teeth pointing in the correct direction for their machine. Once you watch this Tech Tip video, flipping your band saw blade is simple as a flick of a wrist!
Even a low-end bandsaw blade tension meter can cost $300. If you use your bandsaw a lot or are doing delicate work, having the proper tension on the blade can be critical and the only way to accomplish this is with a bandsaw blade tension meter. With the bandsaw blade properly installed, and tensioned, and the blade guides properly set, the next issue is to make sure that the bandsaw table is square and level. We suggest that you go through the setup steps in this how to set up a bandsaw properly: the ultimate g guide before starting a new project and each time you change your bandsaw blade.
band saw blade cutting direction Related Question:
Why does my bandsaw cut to the left?
When the band saw cuts crooked, a dull blade, improper feeding, loose blade tension or not using a work piece guide could be the cause. Use the rip fence or miter gauge to guide the work piece uniformly through the cutting blade to make straight cuts.
Which way do the teeth go on a bandsaw?
On a typical wood or metal cutting blade the hook or of point of the blade should be pointing down for a vertical blade bandsaw, or for a horizontal blade saw the hook of the teeth should be pointed such that they enter the workpiece first as the blade moves.
Which way should blade face on circular saw?
For blade-right models, the correct circular saw blade direction is usually with the label side out. For saws that have the blade on the left, it typically installs with the “ugly” side out. It’s not a hard, fast rule, though. You should always double-check.
Where should a bandsaw blade sit on the wheel?
Make sure the machine is disconnected from the power supply. When tracking, you always want to make sure that the blade is sat on the crown of the wheel, with the deepest part of the gullet in the centre.
Can you put a circular saw blade on backwards?
When cutting vinyl siding with a circular saw, install a fine-toothed blade backwards on the saw for a smoother, cleaner cut, especially in cold weather (when the material is brittle). Make the cut slowly.
Do circular saws cut up or down?
When appearance matters, make cuts with the good side facing down, as circular saws can splinter the wood on the top side. Making your cut line on masking tape can reduce splintering. Start over if you see that you’ve veered off from the cut line instead of trying to curve your way back on track.
Why are circular saw blades on the right?
Blade-Right for the Right-Hander Using the saw this way will place the motor weight over the waste edge when you cut from the end-side of a board or sheet. This means the saw eventually cuts off its own support. Most users have no trouble holding the saw steady, but this can result in bind-ups.