A high-quality band saw may be able to meet or exceed performance expectations that previously were achievable only with a circular cold saw. If you can cut pieces in layers, then a band saw can compete nicely with the volume throughput of a circular cold saw. In comparing a fully automatic band saw to a fully automatic circular cold saw, generally speaking a band saw costs significantly less than a circular cold saw.
10-29-2009, 08:58 PM #1 Cold Saw Vs. Band Saw Right now the only saw I have is a chop saw and that thing sucks. Not true if the cold saw is semi auto type…which is the only type to buy really…a manual cold saw is a silly choice, unless it’s a non ferrous type, in which case it cuts so fast that manual use is ok. A manual cold saw uses round, HSS blades, that can be resharpened over and over and over again- I have cold saw blades that are ten years old.
A band saw gives a larger cutting capacity, whereas a cold saw limits your cutting capacity. While the initial price of a cold saw blade may be higher than a band saw blade, it’s important to remember that a cold saw blade can be re-sharpened. At SEPCO, we provide a band saw cutting and precision cold cutting saws that are both accurate and fast.
The most important difference between cold saws and band saws is the amount of burr on the cuts that they produce. A band saw can give you good quality cuts, but can’t match the smoothness of results from a cold saw. Due to their straight blades, band saws also cut material more quickly than comparable cold saws.
The band saw type can be either hozontal or vertically oriented – I’ll get to that shortly. The main advantage of the horizontal cutt-off saw is they don’t have the hub assembly to worry about, but rather have a bridge that generally allows larger workpieces to be cut. CAUTION – because the parts will usually be hand held, you need to take a lot more care, as any saw will take fingers, thumbs even, in some unfortunate cases, hands off without even slowing down – they’re used a lot in meat processing partly because of that.
metal band saw vs cold saw Related Question:
Is a band saw good for cutting metal?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
What are the disadvantages of a band saw?
The Disadvantages: A bandsaw is limited to the size pieces you can cut because of the circular blade. With the Speedster Bandsaw and Diamond Laser 3000, the maximum size glass piece is approximately 10 to 12 inches in diameter. 2. It does not take the place of simple cuts.
What do you use a cold cut metal saw for?
Cold saws, which spin the blade at a slower rate, are capable of cutting softer metals such as aluminum as well as harder metals like rebar.
Can a bandsaw cut hardened steel?
Carbide band saw blades provide high wear resistance and toughness when cutting a variety of applications such as: case hardened steels, spring steels, high speed steels, nickel based alloys, case hardened steels, composite graphite, high nickel alloys, titanium, inconnel, and other exotic metals.
What is a cold cut saw?
A cold saw is a circular saw specifically designed for cutting metal without generating a lot of heat. Some cold saws use a flood of coolant which transfers heat away from the blade and into the cut material during cutting. Cold saws are often used in welding shops where a high degree of accuracy is needed.
Can I put a metal cutting blade on my miter saw?
Although mitre saws were traditionally used for cutting wood, with the correct blade they can make light work of cutting through steel and aluminium profiles at an angle.
What are 5 general guidelines for using the band saw?
Never push on back of piece with fingers or thumb. Don’t reach across the blade. Make all cuts under power, not while blade is coasting. Never remove guard unless authorized by Technician or WRL Manager.
What’s the difference between a table saw and a band saw?
Instead of the solid, circular plate of steel with carbide teeth on a table saw, the blade of the band saw is exactly that—a narrow, flexible band of steel with teeth formed along one edge. The band saw blade is stretched and driven between two or three wheels.
What are the disadvantages of a cold saw?
Another downside to cold saws is that the hardness makes the saw blades brittle and subject to shock. Any amount of vibration — for example, from insufficient clamping of the part or the wrong feed rate — can easily damage the saw teeth.
What are the 3 main hazards that could arise from using cold saw?
POTENTIAL HAZARDS AND INJURIES Eye injuries. Sharp edges and burrs, metal splinters. Noise.
What is the difference in a cold saw and a abrasive chop saw?
The cold saw has a toothed, high speed steel blade where a chop saw only has an abrasive wheel. The best part of an HSS blade is that it can be re-sharpened.
Can you cut hardened steel with a torch?
If large, even cuts are needed, a high temperature cutting torch will probably be more useful, since its flame is hot enough to actually evaporate the steel in the form of any cuts desired.
Can I cut aluminum with a band saw?
Band saws were never really considered to be a wise choice for aluminum cutting, but that has changed recently. With the advancements in band saw technology, large aluminum billet now can be cut almost as quickly as with large circular saws.
Can you cut metal with a wood blade?
While a metal-cutting saw has a collection bin to prevent metal chips from getting into the machine, a woodcutting saw isn’t designed this way. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque.
Can you cut through steel with a hacksaw?
If you have a small amount of steel to cut, you can use a standard hacksaw blade. Investing in a blade designed for cutting hard substances such as steel is generally only necessary when you plan to cut a significant amount of steel.