How to cut perfect circles with a band saw Photo 1: Attach the runner. Cutting perfect circles is easy with a band saw-as long as you take a half hour to build yourself a cutting jig. The auxiliary fence not only stops the jig at the right spot for turning circles but also keeps the jig from tipping up from the band saw table.
With a simple jig that you can make quickly and easily, you’ll be able to cut an exact circle every time on the band saw without the need to follow a cutline. “Step 1: To create the jig, cut a piece of sheet stock to the width of your band saw’s table. For circles up to 16″ in diameter, a jig 10″ to 12” long is fine. “Step 2: Starting at your mark, use a reliable square to continue the line across the surface of the jig. You can see here that I’ve drilled holes into the jig’s side edges that will accommodate a pair of fence clamps to secure the jig to the band saw’s table. Now, measuring from the front edge, make a series of marks 1” apart along this line.
explain how to cut circles on the bandsaw Related Question:
What do you need to safely cut a perfect circle on a band saw?
Tap a nail through the hole, then flip the jig over. Drill a hole in the middle of the blank and prop the circle stock over the nail shank. Cutting perfect circles is easy with a band saw—as long as you take a half hour to build yourself a cutting jig.
How do you cut circles in wood?
Using a hole saw is the absolute easiest way to cut circles in wood for your project. All you have to do is lock your hole saw in the chuck of your drill or drill press and start cutting. You can use hole saws to cut circles from ¾ inches up to 7 inches in diameter.
How do you cut a small circle with a jigsaw?
Position the jigsaw with the blade inside the starter hole and with the saw’s shoe plate flush with the board. Make sure the blade is not touching the board and start the saw. Cut an arc to reach just inside the waste side of the scribed circle. Continue until you cut about half of the circle.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
What router bit is best for cutting circles?
We recommend a solid-carbide up-cut spiral router bit. For the Model 300 Circle Guide, use a 1/2″-dia. router bit.
What do you cut with a bandsaw?
With the correct blade, a band saw can cut wood or metal, in either curves or straight lines. Blades come in a variety of widths and tooth counts. Narrower blades are good for tighter curves, while wider blades are better at straight cuts.
How does a bandsaw work?
Band saws use blades that are in a continuous loop around the saw’s wheels. With band saws, the blade cutting direction is always downward. This feature allows the band saw to handle more substantial work, like cutting down large pieces of lumber.