If your equipment is Not Under Warranty, or you acquired it from a source other than Shopsmith, contact a Shopsmith Tech Expert. We have created a special Shopsmith Engineering Support Line especially dedicated for Equipment No Longer Under Warranty. Calling our General Customer Care Line will allow you to have a Representatives schedule your Shopsmith Engineering Support Appointment so you don’t have to.
Shopsmith 11″ Bandsaw – 555943 What You’ll Do with Your New Shopsmith Bandsaw Although bandsaws were originally developed to make curved cuts, it didn’t take long before users realized that it offered a number of great, straight-line cutting advantages, as well. Cut Tight Or Sweeping Curves – No home shop saw will cut faster than a bandsaw, and with Shopsmith’s generous-sized support table and full range of 1/8″ to 5/8″ wide blades, you’ll have just what you need to cut simple or intricate curves in wood plastic, and non-ferrous metals. Cut Metals, Plastics & Other Materials – When making straight or curved cuts in non-ferrous metals, plastics, rubber and other materials, no other home shop saw will out-perform the bandsaw.
I have been using the Shopsmith brand blades my father purchased before 1989. I tried to install one and had trouble with the Blade Tension System. I was trying to set tension without a blade installed.
how to set up shopsmith bandsaw Related Question:
What size bandsaw blade fits a shopsmith?
1/4″ Combination Bandsaw Blade Standard with the Shopsmith Bandsaw. 3/4-inch minimum radius.
Where is shopsmith made?
Shopsmith, Inc. in 1972 to resume manufacturing in Troy, Ohio. The plan was to produce spare parts for the old tools sold by Magna and Yuba, but the company soon decided to start selling complete tools based on the popular and robust Mark V. The company moved to Dayton, Ohio in the late 1970s.
What does a shopsmith do?
The Shopsmith is a lathe-based multi-tool that uses a single motor to perform lathe, tablesaw, sanding, and drill press functions. Variations include horizontal boring and disc sander.
How tight should my bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in.
Why won’t my bandsaw cut straight?
Band Saw: Why won’t my band saw cut straight? When the band saw cuts crooked, a dull blade, improper feeding, loose blade tension or not using a work piece guide could be the cause. Use the rip fence or miter gauge to guide the work piece uniformly through the cutting blade to make straight cuts.
Why does my bandsaw blade keeps coming off?
Blade Tension Is Too Loose The most common reason why the blade is slipping off is that there isn’t enough tension to keep it on. Blades can slowly become loose after years of wear and tear, and eventually, you’ll need to tighten or replace them.
Why is my horizontal band saw not cutting straight?
Make sure the blade is running in the correct direction. On machines powered by three phases power so it is common to get the wiring reversed and have the blade running the wrong direction. On all vertical blade bandsaws the working portion of the blade should go down. This forces the workpiece down into the table.
How long is a shopsmith band saw blade?
The Shopsmith Bandsaw accepts continuous- loop blades 72″ long and 1/16″-5/8″ wide. Shopsmith offers a variety of blades from 1/ 16″ wide to 5/8″ wide for cutting wood, plas- tics and nonferrous metals. To use a 1/16″ blade with the Bandsaw, you must install and use Cool Blocks (Part No.
Does shopsmith have bandsaw?
As with all Shopsmith special purpose tools, your bandsaw offers a number of great features and accessories to help you make everything you make – better.
How much does a shopsmith weigh?
Welcome, and you might try looking up on the Shopsmith Products pages the weights of some of the accessories. The weight will be more if on separate stand with separate motor, but for instance the current 11″ bandsaw supposedly weighs 45 lbs. The planer can vary from 61 lbs (Mark V Mounted) to 151 lbs (ProPlaner).
How do I clean my shopsmith?
Clean the sawdust out of the headstock with an air compressor, vacuum cleaner, or tire pump. Check the belts for wear, then lubricate the motor shaft and sheave with two drops of 3-in-1 oil.
How heavy is a shop Smith?
Weight: 250 Lbs. Equipped With: Table Saw, Lathe, Disc Sander, Drill Press & Horizontal Boring Machine.