TO INFORM YOU PRODUCT SUPPORT BULLETIN # 516 TO: AUTHORIZED portable electric tool SERVICE STATIONS factory SERVICE / SALES SUPPORT BRANCH DATE: August, 2010 TOOL(S) PRODUCT(S) AFFECTED: 2629-20 M18™ Cordless Band Saw, 6242-6 Compact Corded Band Saw SUBJECT: band saw blade not tracking / ‘blade-coming-off’ Placing a small piece of “0.010” BRASS or BLUE STEEL SHIM STOCK to the rear of the Front Pulley Axle, as pictured, will help change the front pulley axle’s chamber; improving a band saw blades’ tracking and doing-away-with a ‘blade-coming-off’ of either the 2629-20 M18™ Cordless Band Saw or 6242-6 Compact Corded Band Saw. SHIM STOCK 0.004″ to 0.010″ REAR remove the front pulley cover assembly fully unscrew the front pulley axle using a 5/8″ open end wrench re- Loctite® the front pulley axle threads using Blue 242 Loctite® or equivalent thread the front pulley axle back into the blade tension bar assembly just prior to seating the front pulley axle install a 0.004″ to 0.010″ piece of SHIM STOCK , holding it in place with ‘needle-nose’ pliers and snug the axle down ‘rigorously hand’ tight This bulletin is for informational purposes. No. 14-46-0715 SHIM SERVICE KIT for Compact Band Saws The 0.010″ steel shim stock is to be positioned to the rear of the Front Pulley Axle and secured between the Front Pulley Axle and the surface of the Blade Tensioning Bar Assembly.
how to put a blade on a milwaukee band saw Related Question:
Which way does a bandsaw blade go?
On a typical wood or metal cutting blade the hook or of point of the blade should be pointing down for a vertical blade bandsaw, or for a horizontal blade saw the hook of the teeth should be pointed such that they enter the workpiece first as the blade moves.
What does the blade on a portable band saw do?
The blades available for a portable band saw are made in the shape of a ring, or a band. The band continually rotates on the wheels, creating a smooth cutting motion. The band saw can cut straight lines or change direction quickly to create curves.
What do you do with old bandsaw blades?
There is life for those old, broken, and dull bandsaw blades. Just cut the old blade into sections about 12″ long. Stack the pieces together, alternating the teeth so that they don’t touch their neighbors. Use either same tape, or just braze the ends together,.
Can a bandsaw blade be turned inside out?
hi ,just get heavy gloves,an uncoiled blade ,step on the bottom and turn the blade inside out,and it will go right on a turner mill and just reverse the blade to sharpen.
How much tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
What do you use a band saw for?
A band saw can be used to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. The most common use for the band saw, however, is in cutting irregular shapes. The second most common use is in resawing or ripping lumber into thinner slabs.
What is a metal saw used for?
A saw is a tool consisting of a tough blade, wire, or chain with a hard toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward.