Our readers have shown us several ways of folding bandsaw blades, here’s one of them. Our readers have shown us several ways of folding bandsaw blades. By the time your hand makes three-quarters to one full revolution, the blade will have popped into three coils.
I must admit, when I know someone is watching that hasn’t seen me fold up a bandsaw blade before, I do it extra fast and super snappy to make it seem even more dazzling. I learned how to coil a bandsaw blade like this pre-YouTube and over the phone from the kids at Wood-Mizer, who supply and sharpen my blades. From there, whip the portion of the blade furthest from you towards the ground and just as the blade nears the ground give it a quick jerk up, with a snap.
This is our recommended method for folding a bandsaw blade. Hold the bottom of the loop against the floor with your foot and bring you right hand inside the blade and grasp the top of the loop firmly from underneath. Twist the blade by rotating your right hand so it creates 2 loops.
You may be looking at the blade wondering how it’s possible to fold – but we’ve made it easy to follow for you, so you’ll be storing your bandsaw blades safely in the future. Bandsaw blades are incredibly durable, so folding a bandsaw blade will not break or damage the blade in any way. The Round-Up. Now, you should have a greater understanding of how to fold bandsaw blades, and you should be able to fold them safely without injuring yourself or damaging the blade.
how to roll a bandsaw blade Related Question:
What tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
Why won’t my bandsaw cut straight?
Band Saw: Why won’t my band saw cut straight? When the band saw cuts crooked, a dull blade, improper feeding, loose blade tension or not using a work piece guide could be the cause. Use the rip fence or miter gauge to guide the work piece uniformly through the cutting blade to make straight cuts.
Why do bandsaw blades break?
Machine Defects Even the best blades can fail if there is something else wrong with your bandsaw, and even a small misalignment of bearings or guides can put a twist in the blade as it goes around. Resulting in tension being applied in all the wrong ways which will lead to early breakage.
Why does my bandsaw spark?
Ceramics can cause sparks. Or, if your thrust bearing is too far past the blade, more toward the center of the bearing than the edge, then it won’t turn and you’ll get sparks too, and possibly wear a groove in the bearing.