If you like our blades, then you will want to sharpen them properly. We offer 3/4″, 7/8″, 13/16″ and 1″ pitch CNC machined cams with the Timber Wolf profile.
Yep, I noticed it took 2 or 3 rounds to hit the whole profile on Woodmizer or Lenox blades, of which I have both blades and both cams. Lee, are you saying that the cams from a woodmizer machine will fit on the cats claw or that they will work on the different brand bands. Frank,the different cams will work on the cooks sharpener.
bandsaw blade sharpener cam Related Question:
Is it worth sharpening a bandsaw blade?
But the only way to ensure the functionality of your band saw and the quality of your final product is through using sharp band saw blades. It often makes sense to replace a dull blade with a new one, but you can sometimes get the best value out of merely sharpening an old blade instead of replacing it altogether.
How many times can you sharpen a bandsaw blade?
You should be able to sharpen your blade two or three times before needing to replace it, but sometimes breakage happens. Blade breakage can result from a range of situations. Common causes of blade breakage include: Dull teeth.
How long do bandsaw blades last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
How long do portable sawmill blades last?
Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well.
Why do my bandsaw blades keep breaking?
Machine Defects Even the best blades can fail if there is something else wrong with your bandsaw, and even a small misalignment of bearings or guides can put a twist in the blade as it goes around. Resulting in tension being applied in all the wrong ways which will lead to early breakage.
What allows a saw blade to last longer?
Hang Circular Saw Blades Through the Center Hole Don’t let the blade’s kerf rest on the ground but hang a blade through its center hole for temporary storage. This can be as simple as a nail or screw in the wall, but at least the blade won’t be dulled by the floor or a shelf.
How tight should my bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in.
Why do bandsaws wander?
If the wheels are worn and do not have a distinct top to the crown then the blade will not know where to go, and may wander around. This of course can cause poor cut quality and difficulty in setting the guides.
What is resawing on a bandsaw?
Bandsaw Resawing from the beginning: resawing is cutting a sawn plank of wood into thinner planks on a bandsaw. Thus the cut runs through the plank’s width, which distinguishes bandsaw resawing from ordinary bandsaw rip cuts where the blade runs through the stock’s thickness.