Wood-Mizer’s ReSharp® Sawmill Blade Sharpening Service lets you spend your time sawing, not sharpening blades. Return your sawmill blades to one of our Wood-Mizer ReSharp locations and we won’t just sharpen your blades – we will return them to original manufacturing standards for as little as $9 per sawmill blade. Blades are sharpened and set to original manufacturing standards to maintain quality of cut.
We are an authorized bandsaw sharpening center for Suffolk Machine Corp., manufacturer of Timber Wolf bandsaw blades. We are an authorized bandsaw sharpening service for Suffolk Machine Co. manufacturer of Timber Wolf bandsaw blades. Well maintained bandsaw blades will work for longer periods of time based on proper sharpening and proper care of bandsaw blades and woodcutting machinery.
From small 8″ blades to contractor-grade 12″ blades, we sharpen all types of miter saw blades, including flat-top, alternative bevel, combination tooth and triple chip grind styles. We offer rip saw blade sharpening, and have the experience necessary to maintain the powerful cutting capabilities of your blade, while increasing cut efficiency and reducing scoring through sharper, more refined blades. Whether it’s the blade you rely on for a majority of your cutting projects or a specialty blade that’s dulled from sparing use, we’ll restore it to its highest level of sharpness, so you can get back to cutting with confidence on your table saw.
The good news is all the products in your order are in stock at our warehouse. Then the amazing warehouse staff breaks a sweat picking and preparing your order for shipment. Rest assured once you place your order, you’re added to the priority queue, and we fulfill orders in the sequence they’re received.
Making this sharpener ideal for remote off grid locations. Chainsaw sharpener for 1/4,.325, 3/8, and.404 pitch saw chains. Grinding Stone can be dressed to sharpen many blade profiles.
Early in my career, when a new saw blade dulled and started to cut waves, I would try things like adding tension to the blade, slowing down my feed rate or even adjusting my blade guides. If I could just get an edge back, I could keep cutting with the same blade and not have to mess with sending the blade off to be sharpened, and I would save $7. So, off I went, looking for a way to sharpen blades on my own. First off, no matter how good you get with the sander, the blade will not be as good as a new one or one that has had a full factory grind and set because this grinding is changing the geometry of the already finicky blade.
I was wondering if anyone knows a blade sharpening service that sharpens all makes of blades, I have about 20 blades, some timberking, woodmizer, monkey saver, all mixed up. My blade man is in Alliance, O. He charges me $4.50 for sharp and set. Like Chet said he will sharpen any blade but he has to know what it is.
bandsaw blade sharpener near me Related Question:
Is it worth sharpening bandsaw blades?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.
How many times can you sharpen a bandsaw blade?
You should be able to sharpen your blade two or three times before needing to replace it, but sometimes breakage happens. Blade breakage can result from a range of situations. Common causes of blade breakage include: Dull teeth.
Can you sharpen metal bandsaw blades?
Sharpening Options There are two basic ways to sharpen bandsaw blades, mechanically, with the use of a machine, or machines designed to sharpen and reset bands, and manually, with the use of hand tools, or hand power tools.
How long do portable sawmill blades last?
Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well.
How long do bandsaw blades last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
How many teeth per inch should a bandsaw blade have?
The general rule of thumb is: For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.