I must admit, when I know someone is watching that hasn’t seen me fold up a bandsaw blade before, I do it extra fast and super snappy to make it seem even more dazzling. I learned how to coil a bandsaw blade like this pre-YouTube and over the phone from the kids at Wood-Mizer, who supply and sharpen my blades. From there, whip the portion of the blade furthest from you towards the ground and just as the blade nears the ground give it a quick jerk up, with a snap.
Our readers have shown us several ways of folding bandsaw blades, here’s one of them. Our readers have shown us several ways of folding bandsaw blades. By the time your hand makes three-quarters to one full revolution, the blade will have popped into three coils.
This is our recommended method for folding a bandsaw blade. Hold the bottom of the loop against the floor with your foot and bring you right hand inside the blade and grasp the top of the loop firmly from underneath. Twist the blade by rotating your right hand so it creates 2 loops.
You may be looking at the blade wondering how it’s possible to fold – but we’ve made it easy to follow for you, so you’ll be storing your bandsaw blades safely in the future. Bandsaw blades are incredibly durable, so folding a bandsaw blade will not break or damage the blade in any way. The Round-Up. Now, you should have a greater understanding of how to fold bandsaw blades, and you should be able to fold them safely without injuring yourself or damaging the blade.
how do you roll up a bandsaw blade Related Question:
What tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
How tight should a bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in.