Look at the tension adjustment rod, if it still has it. Look for slippage in the tension rod at the point that a blade would be tensioned properly. The square nut in the tension assembly is of a harder material than the tension rod so the rod is the sacrificial component.
I you do, then I would think you would be able to determine if it is a saw worth your time and money,. I remember years ago, I bought a used band saw from a gun shop, I saw it and was or had been looking at it in a catalog, I asked if I could look at it, and they said yes, then asked if they wanted to sell it, they said yes, so I looked it over and started it up made a noise, I started to adjust it, tracked the blade and adjusted the guides and the roller guide and then adjusted the lower set, had it up and humming and bout it for about half of the catalogs price, after I got it adjusted, I think may be they were starting to have second thoughts. Check it out adjust it get it running true and see if there are vibrations and if there is any thing that one can see that should not be.
“I found a Craftsman 10” band saw for sale on craigslist for $40. Based on my searching is appears to be model 244200. Being a beginner, I don’t need something fancy or expensive but I’m just wondering if anyone has used this model before. My thinking is that for the price, if it works, I’m going to jump on it.
how to buy a used bandsaw Related Question:
How much does a good bandsaw cost?
If you change the stock blade for a better quality one, you can expect to make some reasonable cuts, and that is quite something for the low price of just about $125. It even comes with a miter gauge included, which often isn’t even the case on $2000 bandsaws.
What size band saw do I need for woodworking?
For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
How long does a bandsaw last?
Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well.
What a band saw is used for?
A bandsaw (also written band saw) is a power saw with a long, sharp blade consisting of a continuous band of toothed metal stretched between two or more wheels to cut material. They are used principally in woodworking, metalworking, and lumbering, but may cut a variety of materials.
What is the difference between a band saw and a scroll saw?
Now, one of the really big differences is that the scroll saw’s blade moves up and down, whereas the band saw’s blade moves in a continuous downward motion. Band saws also differ in the thickness and size of materials which they can handle.
How do you pick a bandsaw?
The two main things to consider when choosing a band saw are the depth of cut and the throat. The saw’s depth of cut is the distance from the table to the upper blade guides. Many band saws are marketed on this feature alone, which tells the prospective buyer how thick of stock can be cut using the band saw.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
How thick of wood can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
What is a 14-inch bandsaw?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
Are bandsaw blades worth sharpening?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.
How long do metal bandsaw blades last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
Why do bandsaw blades break?
Machine Defects Even the best blades can fail if there is something else wrong with your bandsaw, and even a small misalignment of bearings or guides can put a twist in the blade as it goes around. Resulting in tension being applied in all the wrong ways which will lead to early breakage.
Do I need a scroll saw if I have a bandsaw?
If you are making a jigsaw puzzle for your children, there is no question that you will need a scroll saw and not a band saw. Very detailed and intricate work will not go as well with the band saw. If you are a person that likes crafting and ornate projects, the scroll saw is going to be a much better choice.
Do I really need a scroll saw?
So, unless you’re about to start a project requiring the precision of a scroll saw, such as intarsia (wood mosaic) projects or wooden children’s toys and puzzles, you don’t need one. If you are a tool junkie or experimental woodworker, if you don’t already own one, a scroll saw is probably already on your wish list.
How thick of wood can a scroll saw cut?
Wood Thickness Scroll saws are capable of cutting, or can be made to cut, wood up to 2 inches thick — but it’s not advisable. Unless you’re cutting very soft wood it can result in damage to the blade, the saw or your fingers from pushing too hard.