This is another video tutorial that gives you a thorough explanation of how to construct your bandsaw fence. The tutorial also comes with a few tips and tricks for your bandsaw fence to make it better. You would need to make notes as you go through the tutorial because there are some important points he makes regarding the design within the tutorial.
To put the fence on the right side of the blade, unscrew the fence from the clamp, turn it around and remount it. Tap the bit with a hammer through the hole in the bandsaw table to mark a pilot hole on the fence rail. For wider capacity, temporarily extend the fence’s rails by remounting them in a second set of holes.
A good fence can make your band saw one of the most useful machines in your shop. This fence can be made in a weekend for around $20, and it will do a great job on your band saw. You can adapt this fence to any band saw, but the dimensions given here are for my 14″ Delta.
Of course, one of the reasons for not using the band saw more was the inconvenience of the temporary fence and I knew that with a better fence, the band saw would see more action. The high fence clamps to the main fence using carriage bolts and wing knobs. These clamp the high fence to the upright on the main fence holding it firmly.
diy band saw fence Related Question:
Do you need a fence for a bandsaw?
If you use your bandsaw only for making curved cuts, you’ll likely never need a rip fence. For accurate ripping and resawing, though, a good fence helps greatly. That said, many bandsaws don’t come with a fence. Those saws that do have fences, particularly on lower-cost models, often don’t work that well.
What can I use as a table saw fence?
Wooden Table Saw Fence. You might also want to consider building a wooden table saw fence. You can make one right at home just using half an inch of plywood. A DIY wooden saw fence is tailored to operate on your rail with accurate measurements.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
How thick of wood can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
How high can a bandsaw cut?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
Can a band saw cut curves?
Whether it’s a tight curve or a closed opening, you can cut it on your band saw with a couple of easy tricks. Cutting on the band saw can be the same thing. The narrower the blade, the tighter the spots you can cut; in fact, some band saw blades rival a scroll saw for cutting tight curves.