You could use a 1×42 belt grinder for bevel grinding, profiling, and most of the initial steps of knife development, but the lower motor power and smaller work surface associated with 1×42 grinders leaves the 2×72 grinders more equipped to create knives at a faster pace. In many cases, it’s better to go with a 2×42 belt grinder over a 1×42 grinder. A 2×72 grinder would work best with a motor that has at least 2hp. On the other hand, a 2×48 grinder can work well with a motor that provides 1.5hp, because the length of the belt is shorter.
Backings with an ‘A’, ‘B’, ‘C’, ‘D’, ‘E’, or ‘F’ backing are all considered paper backings. ‘E’ and ‘F’ weight backings are typically used to make belts as they are the most durable paper backings available though still much less durable/thick than the full or partial synthetic backings like an ‘X’ or ‘Y’ weight. 4″ x 36″ sanding belts offer the best middle ground between the heavy duty grinding and finer detail work many blades can require-e.g. sharpening or detailed handle work.
4×36 belt sander for knife making Related Question:
What size belt sander is best for making knives?
2×72 Belt Grinders For professional knife making, 2×72 size belts are considered the industry standard.
What grit belt is best for sharpening knives?
Sharpen Knives (Good Idea) To sharpen yours, start with a 150-grit belt. Slowly run one side of the blade across the belt a few times using light pressure (the sharp edge should point down at an acute angle to the belt). Next, sand the other side. Turn off the sander, swap in a 240-grit belt, and sharpen again.
What kind of belt sander do they use on forged in fire?
Porter-Cable PCB420SA Belt Sander. Jet Tools J-4002 Bench Belt and Disc Sander.
What is the difference between a belt sander and a belt grinder?
The belt grinder belt speed typically runs double from what the belt speed of the belt of a belt sander is running at. Belts grinders you generally have multiple grinding points such as the platen and the second grinding point is the contact wheel.
What is a 1 inch belt sander used for?
The H3140 1″ x 30″ Belt Sander provides a moving abrasive surface that can be used to shape and contour small workpieces. By tilting the adjustable table, sanding operations can be performed on miter-cut, or other angled workpieces.
What are knife grinders?
The duties of a knife grinder are to sharpen, straighten, and smooth knives, blades, and other parts for cutting equipment, such as deli slicers or scissors. Some knife grinders work at production or manufacturing facilities and have many of the same responsibilities as buffers and polishers.
What size sanding belt do I need?
dimensions listed width/length) Wrap it around the belt sander the same way you would put a belt on it. Cut the string so the ends meet up and then measure the string from end to end. To determine the width of the belt, you can measure the width of the roller or contact wheel the belt will run against.
Can you use a belt sander as a belt grinder?
High speed abrasives heat the edge very quickly, especially at finer grits (finer than 120) and even more if the abrasive is a little worn. I have belts with grits as small as 15 micron, but no longer use them. A 1″ belt sander can replace a grinding wheel for many sharpening applications.
What kind of sanding belts are best for metal?
As high-performance belts, both zirconia and ceramic sanding belts will last longer and remove metal faster than aluminum oxide or silicon carbide sanding belts. Both belts have the ability to resharpen as they wear and both are primarily used on metal applications. In the end, both types of belts are excellent belts.
Will a belt sander work on metal?
If you use the belt sander to sand metal, you’ll create sparks, which can start a fire if they mix with the sawdust in the machine and the dust bag. Blow or vacuum the dust out of the sander before you use it on metal, and remove the dust bag. Make sure the trigger is off before plugging the sander in.
What belt grinder does Jason Knight use?
Its elegant rock-solid design has made the Brodbeck Ironworks the preferred choice for bladesmiths and blacksmiths such as J. Neilson, David Baker, Jason Knight, Ben Abbott, Curtis Haaland, Ilya Alekseyev, Matt Stagmer, Chris Cash, and Geoff Feder, among others.
What is a belt grinder used for?
Belt grinding uses an abrasive belt attached to a motor (visualize a chainsaw without blades) to grind down the surface of a working material that makes contact. A belt grinder (not to be confused with a belt sander) is typically used on metal materials and is excellent at grinding down metal surfaces.