“The G0819 15” 5 HP Open-End Wide-Belt Sander is for those looking to maximize efficiency in their wood shop. “With a footprint of 19-1/2″ x 27-1/2″, this heavy-duty sander is capable of sanding a 30″ wide workpiece in two passes. SPECIFICATIONSSanding belt motor: 5 HP, 220V, single-phase, 30 A Conveyor motor: 1/2 HP, 2.8A Air requirement: 75 PSI, 2 CFM Maximum board width: 15″ single pass, 30″ double pass Maximum board thickness: 6″ Minimum board length: 12-5/8″ Sanding belt size: 16″ x 48″ Sandpaper speed: 2300 FPM Conveyor speed rate: 16.4, 23, 32.8 FPM Conveyor table length: 24″ Platen type: 1-3/4″ x 15-3/8″ Graphite pad Dust port size: 5″ Footprint: 19-1/2″ x 27-1/2″ Overall size: 29-1/8″ W x 38-1/2″ D x 64-1/2” H Approximate shipping weight: 930 lbs.
As the trailing end of the board exited the sander and was released from the in-feed pressure roller, a little sanding gouge occurred about 4 inches from the end of the board. In conclusion I would say that the grizzly 15″ open end wide belt sander preforms beautifully for sanding pieces 15″ or less in width. I make a lot of cabinet doors between 15″ and 18″ in width, and so in retrospect the slightly wider grizzly 18″ wide belt sander would have been a better machine for me, foregoing the ability to sand wide pieces in two passes, a feature I’m not using, and gaining the ability to sand cabinet doors up to 18″ wide, something I would be doing often if I could.
2.5 x 14 belt sander Related Question:
What is the standard size for a belt sander?
SIZE. The size of a belt sander is measured by the width and length of the belt. Belts range in size from small, detail-type sanders with belts that are only an inch or two wide to heavy-duty 4″ x 24″ machines. A common size for home shop use is a 3″ x 21″ sander.
What size sanding belts are there?
Sanding belts are available in a variety of sizes from ¼” x 18” all the way up to 60” x 360” and beyond (popular sizes include 2 x 72, 2 x 42, 1 x 30, 2 x 48, 3 x 18, 4 x 36, and 4 x 24).
What is a narrow belt sander used for?
Belt sanders are multiuse tools. They are commonly used for trimming to a scribed line (photo), sanding very rough surfaces, leveling surfaces (like a replacement board in a hardwood floor) and freehand rounding and shaping.
What is the best speed for a belt sander?
The optimal speed for belt grinders is largely dependent on a number of factors, including type of abrasive grain, grit grade, workpiece material, and more. Generally speaking, a safe speed in most cases is 3,000 surface feet per minute. You can calculate surface feet per minute using the formula SFPM = RPM X .
How do I choose a sanding belt?
Choosing the Right Sanding Belt Grit The heavier the job, the coarser the sanding belt you’ll need. 40 to 60 grit is best suited for the heaviest work. When you’re performing tasks such as smoothing surfaces or removing minor blemishes, you’re better off using sandpaper with 80 to 120 grit.
How tight should a sanding belt be?
Most wood sanding applications require a belt tension near 40 psi. Because the goal is to keep the belt from slipping, users sometimes err on the side of using too much belt tension. Several problems can result from excessive belt tension.
What kind of sanding belts are best for metal?
As high-performance belts, both zirconia and ceramic sanding belts will last longer and remove metal faster than aluminum oxide or silicon carbide sanding belts. Both belts have the ability to resharpen as they wear and both are primarily used on metal applications. In the end, both types of belts are excellent belts.
What size belt do I need?
The general rule for measuring a man’s belt size is to take your pant size and add 2 inches. For example, if you wear a size 34 pant, we recommend a size 36 belt. You can also use a tape measure where you will be wearing your belt, that number is where the center hole of the belt will fit.
What is a 1 inch belt sander used for?
The H3140 1″ x 30″ Belt Sander provides a moving abrasive surface that can be used to shape and contour small workpieces. By tilting the adjustable table, sanding operations can be performed on miter-cut, or other angled workpieces.
What is better belt sander or orbital sander?
A belt sander is more effective for large materials, while the orbital sander is ideal for small spaces and pieces of furniture. A belt sander works effectively on flat surfaces, while an orbital sander can work with various angles.
Can you use ceramic sanding belts on wood?
Ceramic abrasives are ideal for aggressive cutting of metals and hard woods. The material works best when high speed and high pressure is applied. It is so aggressive, caution must be used to prevent scorching of the working material if you’re working with wood.
How much wood can a belt sander remove?
As mentioned earlier, abrasive belts can only remove a certain amount of stock dependent on grit size. With a three-head sander you can run a grit sequence of 100-150-180 and remove approximately 1/32 inch in one pass.
How do you find the linear speed of a belt?
A conveyor speed, or in this case the linear belt speed, can be calculated using the formula pi/2*D*RPM/60. In this formula, D is diameter and RPM is the rotations per minute of the conveyor. The value is then divided by 60 to convert the speed into distance per second.
How do I determine my belt speed?
Calculate the belt velocity by multiplying the circumference of the pulley by the speed of the pulley. For example, the drive pulley has a circumference of (Pi)(D2). This equals 2(Pi). The speed of the pulley is 1,800 rpm.
How can I make my sanding belt last longer?
Another way to extend the life of your belts is to prevent clogging and loading in the first place. This can be done with an abrasive belt grease stick that goes on the belt before use. These sticks have a lightweight grease that spreads a thin layer of lubricant over the surface of your sanding material.