Our 8″ x 19″ Floor Sanding Belts are ideal for fast cuts during pre-finish floor sanding and cutting through layers of floor coatings. Aluminum Oxide – Aluminum Oxide belts are great belts for floor refinishing if you dont want to spend the money for the zirconia or ceramic in the coarser grits from 24 to 120. Zirconia – Zirconia belts for your EZ-8 floor sander are a FANTASTIC option, and our choice for removal of the old, crusty flooring in a hurry! 😉 For the money, these things are killer and we find perform much better than the Norton Bluefire belts by 20%. Zirconia is only offered in grits 24, 36, 40, 60, 80 & 120 as its mainly meant for stock removal.
8 x 19 belt sander Related Question:
What is the standard size for a belt sander?
SIZE. The size of a belt sander is measured by the width and length of the belt. Belts range in size from small, detail-type sanders with belts that are only an inch or two wide to heavy-duty 4″ x 24″ machines. A common size for home shop use is a 3″ x 21″ sander.
How do I know what size sanding belt I need?
Take a piece of string and wrap it around the sander as you would the sanding belt. Cut the string where it meets then measure the length of the string. This is your belt size.
What is the best speed for a belt sander?
The optimal speed for belt grinders is largely dependent on a number of factors, including type of abrasive grain, grit grade, workpiece material, and more. Generally speaking, a safe speed in most cases is 3,000 surface feet per minute. You can calculate surface feet per minute using the formula SFPM = RPM X .
What is a 1 inch belt sander used for?
The H3140 1″ x 30″ Belt Sander provides a moving abrasive surface that can be used to shape and contour small workpieces. By tilting the adjustable table, sanding operations can be performed on miter-cut, or other angled workpieces.
How tight should a sanding belt be?
Most wood sanding applications require a belt tension near 40 psi. Because the goal is to keep the belt from slipping, users sometimes err on the side of using too much belt tension. Several problems can result from excessive belt tension.
What kind of sanding belts are best for metal?
As high-performance belts, both zirconia and ceramic sanding belts will last longer and remove metal faster than aluminum oxide or silicon carbide sanding belts. Both belts have the ability to resharpen as they wear and both are primarily used on metal applications. In the end, both types of belts are excellent belts.
Should you push down on a belt sander?
You do not have to push down on the sander. Pull the sander backward letting the weight and sharpness of the belt cut the surface. Don’t pull back and then tip the sander off the edge or you’ll cut off too much wood and need to build it back up with putty.
Can you use a belt sander against the grain?
Because they have a lot of power and can handle coarse grits, they excel at the rapid removal of wood. Also, unlike orbital and vibrating sanders, the sanding action is linear, so even with coarse grits you can sand with the grain and get a good-looking result.
What is better belt sander or orbital sander?
A belt sander is more effective for large materials, while the orbital sander is ideal for small spaces and pieces of furniture. A belt sander works effectively on flat surfaces, while an orbital sander can work with various angles.
How do you find the linear speed of a belt?
A conveyor speed, or in this case the linear belt speed, can be calculated using the formula pi/2*D*RPM/60. In this formula, D is diameter and RPM is the rotations per minute of the conveyor. The value is then divided by 60 to convert the speed into distance per second.
How do I determine my belt speed?
Calculate the belt velocity by multiplying the circumference of the pulley by the speed of the pulley. For example, the drive pulley has a circumference of (Pi)(D2). This equals 2(Pi). The speed of the pulley is 1,800 rpm.
What grit sizes are commonly used on a belt sander and why?
Choosing the Right Sanding Belt Grit The heavier the job, the coarser the sanding belt you’ll need. 40 to 60 grit is best suited for the heaviest work. When you’re performing tasks such as smoothing surfaces or removing minor blemishes, you’re better off using sandpaper with 80 to 120 grit.
How much wood can you sand down?
I’m not sure where sanding comes into play here, but yes, you absolutely could sand a 1/2″ off of a piece of wood. It will take some time with a belt sander and even more time if you’re doing it by hand. (On the bright side, you’ll build a good bicep that way!)
Why does the sandpaper keep breaking on my belt sander?
There are pretty much two reasons they can be breaking so quickly: the belts are old stock (or have been stored in humid or hot locations) or the tension is too high. Or both.