Stock sanders can be decorated and a guild system is allowed to help the sander go straight down the track. The only rules a modified sander has to follow are 1 – must fit onto the track, 2 – plug into a standard 3 prong 110v outlet , 3 – must use an unaltered store bought sanding belt of any grit. In the event of a sander not being powered “on”, entries have one false start opportunity for the entire race event.
Accuride founded the Belt Sander Racing Association, arguably the most prominent league in the field. Bertie’s Inn of Pennsylvania hosts a yearly belt sander racing competition. Bertie’s Inn, a charming award-winning restaurant in Reading, Pennsylvania, hosts an annual belt sander racing event.
Belt-sander racing is the practice of racing belt sanders competitively. Belt sanders may have been one of the first power tools used in the growing field of power tool drag racing wherein a pair of stock or modified belt sanders are placed in parallel wooden channels and fitted with long extension cords. For more than two decades, Bertie’s Inn in Reading, Pennsylvania has held a fundraiser called Bertie’s Inn Belt Sander Race.
Track: The track consists of seven, eight-foot portable table sections hooked together to form a two side-byside drag racing lane. The remaining track is used for slowing and stopping with padding at the end of the track for sanders to stop safely. Race entries must fit into the track and run on the track surface.
belt sander racing rules Related Question:
How long is a belt sander race track?
Riders sit on and race hand-held belt sanders on a 40-foot-long plywood track.
What are the safety rules for a belt sander?
Safety Rules Don’t wear loose clothing or gloves, keep long hair tied back. Never remove guards unless authorized by WRL Manager. Don’t place hands or fingers under pieces during feeding to avoid potential pinch hazard. Don’t let hands come too close to top of opening on sander.
Who makes the fastest belt sander?
Here’s a photo of the foundation of our racer: A Makita 9403, which I snagged on Amazon for a great price. My research uncovered that this sander is the fastest stock sander, with 1650fpm (feet per minute). That fact alone makes this a great choice if you are racing in the Stock Class.
When using a belt sander you should never?
1. Do Not use the belt & disc sander if you are too tired, hungry, sad, mad, or dehydrated. Never work while under the influence of drugs, alcohol, or any medication that creates drowsiness or impaired thinking.
What are the 3 most important sander safety rules?
Safety Rules Dust mask advised. Don’t wear loose clothing or gloves, keep long hair tied back. Never adjust Sander or setup while Sander is running. Never remove guard unless authorized by Technician or WRL Manager • Setups requiring anything other than the standard sander equipment must be approved by supervisor.
Should I use gloves on belt sander?
Never wear gloves when using a belt sander. Many work gloves do not always fit tightly. This creates a situation where the gloves can actually become caught in the sander. You should always wear protection for your ears when using any type of power tool.
Do belt sanders need guards?
The belt guards and motor cover need to be in place and need to be secure before starting the machine. The gap between the sanding belt and the table cannot exceed 1/8” 13 SAFETY PRECAUTIONS II ● Keep machine clear of Excessive dust. Dust is flammable and potentially explosive.
Do I need a variable speed belt sander?
VARIABLE SPEED. A belt sander excels at removing a lot of material at high speed. But you should also be able to use your sander to do controlled sanding. That’s when a variable speed motor can be helpful.
What is the quietest belt sander?
Best Overall: Makita 9403 4-Inch x 24-Inch Belt Sander It’s powerful enough to be described as a “beast,” though it keeps its roar down, boasting the title of quietest belt sander in its class with noise levels limited to 84 dB.
What may happen if you use too much pressure on the sanders?
Avoid pushing down with too much pressure on the sander. However, doing this can cause issues like swirls, cut-through, uneven sanding and other problems, such as excess heat and loading.
How much weight should you apply to the belt sander while sanding?
No need to lean on the sander. Just let the weight of the machine do the work. When you get to the end of the board make sure the platen doesn’t cantilever too far past the edge. Allow 1/3 or less of the platen length to project over the edge.
When changing sanding belts or discs what should be done to the belt disc sander?
When changing sanding belts or discs, what should be done to the belt/disc sander? Disconnect the machine from the electrical service. On most disc sanders the table can be adjusted ___________ degrees. 45.
What position should the belt sander be positioned to sand edges?
For surface sanding using the stationary belt sander, place the table in a horizontal position. Curves can be sanded on the open end of a stationary belt sander when the table is in a horizontal position.
What PPE should you wear when using a belt sander?
What should you do to work safely with belt sanders? Wear safety glasses or goggles, or a face shield (with safety glasses or goggles). Wear a dust respirator for dusty operations. Make sure the sander is switched “OFF” before connecting the power supply.
What does a Linisher do?
A linisher turns a belt or disc of abrasive material to smooth a workpiece, creating a level, even surface. It can also be used to polish materials. Materials are usually wood or metal but, can be plastic also.