Does have split in cord sheathing, however is an easy fix by wrapping with electrical tape or shortening cord as the cord is plenty long. Condition: Used., Condition: Minor dirt and pitting. Good seller with good positive feedback and good amount of ratings.
when using a belt sander prevent gouging by placing the Related Question:
How does a belt sander prevent gouging?
Don’t lean on the machine. Use nothing but 120-grit paper until you’re comfortable with the machine. Don’t overextend yourself. Running a belt sander at your reach’s extreme end is a sure way to gouge material.
What safety precautions do you have to follow when using the belt sander?
Safety Rules Don’t wear loose clothing or gloves, keep long hair tied back. Never remove guards unless authorized by WRL Manager. Don’t place hands or fingers under pieces during feeding to avoid potential pinch hazard. Don’t let hands come too close to top of opening on sander.
How should the belt sander be placed when setting it down after the sanding?
6. When finished sanding lift the belt sander off the material and then release the Off/On switch. 7. Lay the belt sander on its side when setting the tool down.
Why are sanding belts directional?
Because of that they have to be run in one direction. Because there are a few companies still manufacturing in such a way, the material manufacturers elected to keep the directional arrows. Any belt that has a tape joint can be used in either direction.
Which sander is used to sand in corners and tight places?
The detail sander is specifically designed for the purpose of sanding corners and does an excellent job of reaching tight spaces. You can also sand by hand if you want using a wedge of wood and sandpaper.
Why must the belt sander be used with the grain?
With a belt sander, you can sand parallel to the grain of the wood. This will produce a smooth finish free of scratches and tiny blemishes.
What are the 3 most important sander safety rules?
Safety Rules Dust mask advised. Don’t wear loose clothing or gloves, keep long hair tied back. Never adjust Sander or setup while Sander is running. Never remove guard unless authorized by Technician or WRL Manager • Setups requiring anything other than the standard sander equipment must be approved by supervisor.
What is a finishing sander used for?
An orbital finishing sander is characterized by a rectangular head that can be fitted with standard sand paper sheets. Sanders are tools for polishing, shaping, or smoothing wood and other surfaces including metal and plastic, most often using an abrasive-covered belt or disk.