I’ve finally finished my new edge belt sander table. Because of the way I work, this kind of edge belt sander is one of the tools I rely on most, and I use it in almost all of my projects. As you can see, it’s simply a portable belt sander that’s been rotated and attached to a table.
With things the way they are with the economy, more and more woodworkers are looking to get the most use out of the tools they already have, which is why I created this simple base fixture that transforms a standard portable belt sander into a small horizontal benchtop sander. “Use a square rule to ensure that the sander is completely level, if it isn’t save some wood scrap to prop up the end until it has leveled out. To build the fixture, start by cutting out a base plate from 1/2″ or 3/4″ plywood or MDF that’s 14″ wide and 6″ to 8” longer than the length of your belt sander. Set your sander atop the base plate with the open side of the belt rollers facing up, and position the belt platen parallel to the long edge of the base.
Master woodworker Matthias Wandel has been slowly building out his workshop with more and more homemade equipment. You may be able to find the same content in another format, or you may be able to find more information, at their web site. You may be able to find more information about this and similar content at piano.io.
diy table top belt sander Related Question:
Can you make your own sanding belts?
They are made and sold for building and repairing abrasive sanding materials. You can also mend or make abrasive belts by this DIY method: Obtain some bias binding tape from a fabric store, or you can make your own.
Can you turn a belt sander upside down?
It’s possible to clamp a belt sander upside down and freehand your finish carpentry tweaks, but you’ll probably get better results if your sander is firmly and reliably attached using a sanding stand.
Will a belt sander flatten a board?
A belt sander can remove material in a hurry. With the right tips and techniques, you can use this common tool to quickly flatten glued up panels. No matter how careful I am when gluing up a large, solid-wood panel for a project, the joints between the boards never seem to end up perfectly flush.
What are sanding belts made of?
There are 4 major categories of abrasive sanding belt material that are most common. These are; Aluminum Oxide, Zirconia (sometimes referred to as Zirconia Alumina), Silicon Carbide and Ceramic.
Can you turn a table saw into a sander?
Turn Your Table Saw Into A Sanding and Setup Station With This Great Package! Use these hook and loop sanding disks and 10″ Set & Sanding Plate to turn your table saw into a versatile sanding station. With this setup, you can save space in your workshop by converting your 10″ table saw into a power sanding wheel.