Explorer Series machines and systems is Midwest Automation’s custom line of wide belt sanding machines designed to meet your specific requirements. Available in wet or dry, top and/or bottom, and single or multiple head configurations in any width from 12″ to 64 “. Constant pass line height and material handling integration is alsoavailable, if required.
Wide-belt sanding machines sand down wood to a specific thickness with a smooth finish. The 13 Series model by Timesavers is among the most reliable wide-belt sanders for sale on the market. These machines are typically hand-fed, off-line machines, giving the user the ability to control the production level, to maintain a long lifespan.
top and bottom wide belt sander Related Question:
What is a wide belt sander used for?
The wide belt sander is used to machine stock flat and to specific thicknesses. It can be used with solid wood and composite boards such as plywood and MDF. A rubber conveyor carries your stock through the machine while a wide abrasive belt removes material from the top surface.
What is the most popular size belt sander?
A common size for home shop use is a 3″ x 21″ sander. This size offers a sizeable sanding area, without the fatigue generated by running a large machine. I think you’ll find it can handle most tasks in the shop.
Is a wide belt sander better than a drum sander?
In short the wide belt wins in every way except cost, there’s really no competition. A drum sander is a nice tool that’ll get you buy for hobby work, or even as a small shop until you can afford a wide belt. But trying to compare a drum to a widebelt is not fair to the drum.
What grit sizes are commonly used on a belt sander and why?
Choosing the Right Sanding Belt Grit The heavier the job, the coarser the sanding belt you’ll need. 40 to 60 grit is best suited for the heaviest work. When you’re performing tasks such as smoothing surfaces or removing minor blemishes, you’re better off using sandpaper with 80 to 120 grit.
How tight should a belt sander be?
In basic terms, the amount of tension on the coated abrasive belt should be just enough to keep the belt from slipping on the drive wheel, and to keep the belt from tracking off the wood working machine.
When should I use a belt sander?
Belt sanders are multiuse tools. They are commonly used for trimming to a scribed line (photo), sanding very rough surfaces, leveling surfaces (like a replacement board in a hardwood floor) and freehand rounding and shaping.
How much material can a wide belt sander remove?
As mentioned earlier, abrasive belts can only remove a certain amount of stock dependent on grit size. With a three-head sander you can run a grit sequence of 100-150-180 and remove approximately 1/32 inch in one pass.
What size sanding belt do I need?
dimensions listed width/length) Wrap it around the belt sander the same way you would put a belt on it. Cut the string so the ends meet up and then measure the string from end to end. To determine the width of the belt, you can measure the width of the roller or contact wheel the belt will run against.
What is the best speed for a belt sander?
The optimal speed for belt grinders is largely dependent on a number of factors, including type of abrasive grain, grit grade, workpiece material, and more. Generally speaking, a safe speed in most cases is 3,000 surface feet per minute. You can calculate surface feet per minute using the formula SFPM = RPM X .
What is the quietest belt sander?
Best Overall: Makita 9403 4-Inch x 24-Inch Belt Sander It’s powerful enough to be described as a “beast,” though it keeps its roar down, boasting the title of quietest belt sander in its class with noise levels limited to 84 dB.
What is the fastest belt sander?
Here’s a photo of the foundation of our racer: A Makita 9403, which I snagged on Amazon for a great price. My research uncovered that this sander is the fastest stock sander, with 1650fpm (feet per minute).
Is a drum sander worth it?
The drum sander is an incredibly useful tool that will have a huge impact in your workflow. It will also open up a bunch of doors for you, especially when it comes to the world of home-sawn veneer. Although they aren’t inexpensive, I do consider them to be a worthwhile investment.
What is a platen on a wide belt sander?
Platens. Platen heads are the work horse of the segmented platen machine. They are mostly used for conventional sanding of raw wood or between coats on finish. Most parts run through a wide belt machine will have the grain running parallel to the feed. This is the type of head that would sand these parts.
What is the roughest grit sandpaper?
What Is Sandpaper Grit? Sandpaper grit is sized by a gauge number, with lower numbers signifying larger, coarser grits. For example, #24- or #40-grit sandpaper is a very coarse, rough sandpaper, while the #1,000-grit paper is extremely fine with very small abrasive particles.
How can I make my sanding belt last longer?
Another way to extend the life of your belts is to prevent clogging and loading in the first place. This can be done with an abrasive belt grease stick that goes on the belt before use. These sticks have a lightweight grease that spreads a thin layer of lubricant over the surface of your sanding material.