If you want to sand your deck and you were wondering how long it would take. In general, it will take you 8 hours to sand a deck that is 25m2, using a belt sander. There are a few factors that can affect the time it takes to sand your decking.
What we aim to do is give you a guide to follow of how to use a belt sander on a deck. As you’re operating the belt sander you’ll want to make sure you have a firm grip on the sander. To highlight what was covered on how to use a belt sander on a deck.
One of the most frustrating problems that can crop up when you decide to stain or restain your deck is that the stain doesn’t absorb into the wood correctly. When sanding any type of wood to prepare for a new coat of stain, you have to be ultra-careful with how much you sand the wood and the level of sandpaper grit you use. Simply sand the wood again and make sure to properly clean and brighten it before reapplication of your stain.
If the wood gets wet after it’s been sanded, but not before it’s been stained or painted, it’s back to square one – you’ll need to wash and sand it again. Floor sanders can only sand surfaces that are perfectly flat, and deck boards are slightly curved. Then they’ll use a palm sander for the areas the belt sander couldn’t reach; followed by a sanding sponge wrapped in sand paper for the areas the palm sander couldn’t reach.
how to sand a deck with belt sander Related Question:
Can you use a belt sander to sand a deck?
Can you use a belt sander on a deck? Using a belt sander on a deck is one of the great ways to sand your deck. So ‘yes” I would definitely use a belt sander on a deck. Just make sure you go in the direction of the timber.
What type of sander should I use to sand my deck?
Belt sanders, whether hand-held models or large uprights, tend to gouge softwoods, so an oscillating or random orbit sander is usually the better choice. Make sure your deck is thoroughly dry before you sand.
Can you sand a deck with an orbital sander?
A random orbital sander is a specialized tool that sands wood in an elliptical pattern. It’s the most efficient sander to use when refinishing a deck, as they’re easy and practical to use.