This is a table saw that makes perfect miter cuts the first time.
A solid-steel laser-cut protracter head and gold anodized Track Fence make this tool even better.
Every 5 degrees there is an angle stop with a number on it.
Teeth with precise angle indexin.
There are 6 expansion points on both sides of the bar that can be moved so there is no side play. Amazon.com has this bar.
Use the Incra Miter 1000 Table Saw Miter Gauge by Incra to get perfect miter cuts the first time, without having to try and try again. Solid steel laser cut protracter head with a gold-anodized Incra Track Fence and a red Stop Positioner make it easy to stop quickly and accurately. The sliding scales fit perfectly in the top slot on the fence to make this process easy and quick. They’re made of solid steel and laser-cut with precision angle indexing teeth that lock into 41 positive angle stops in 5-degree increments over the full range of + or -90 degrees.
Besides the standard miter head, there is also an 18-inch track fence, a sliding stop positioner, and a GlideLOCK miter bar. The Miter Gauge also has six expansion points that let you make changes to both sides of the bar so there is no side play and no friction when you move it. Table saws with 3/4-by-3/8-inch miter gauge channels, such as Delta, Craftsman, and foreign-made ones can be used. It doesn’t matter if you need a simple 90-degree cut, simple picture frames, complex compound miters, or a 20-sided object. The Miter 1000 has perfect repeatable accuracy every time. This item also comes with a one-year limited warranty.
There is a Manufacturer.
When you use the 1000/18T miter gauge from Incra, you don’t have to set up a bunch of different setups to get perfect miter cuts the first time. It has 41 angle stops, with numbered stops every 5 degrees over the +90-degree range and two special stops at 22-1/2 and 67-1/2 degrees. It also has special stops at those two points. Besides the standard miter head, there is also an 18-inch track fence, a sliding stop positioner, and a GlideLOCK miter bar.
Nice miter saw, but I don’t like having to use so many different-sized Allen wrenches to make changes. Use only two sizes of screws and have a double-headed wrench.
