Most sanding belts are now made with a diagonal splice joint that is held together with a strong piece of special tape. Then use CA adhesive to bind the bias binding tape to the cleaned edges of the sanding belt you want to make or repair. His solution is to store new and used belt sander belts in sealable freezer bags until he’s ready to use them.
To prevent your belt from breaking prematurely, check the recommended belt direction. There are various causes of improper tracking, which we’ll cover in the following section on wide belt sander maintenance. Improper tension pressure: Belt tracking problems can also be caused by improper tension – if the tension isn’t high enough, there will not be sufficient pull for the belt to stay in line.
“First, peel the remaining factory tape off the belt splice. Cut a piece of cloth bias tape about 2” longer than the width of the belt. Lay one end of the belt, grit-side down, on the bench; then apply cyanoacrylate glue to the end of the belt. Wrap the belt around and repeat the gluing process to reconnect the ends of the belt.
how to fix a belt sander Related Question:
Can sanding belts be repaired?
You can also mend or make abrasive belts by this DIY method: Obtain some bias binding tape from a fabric store, or you can make your own. Then use CA adhesive to bind the bias binding tape to the cleaned edges of the sanding belt you want to make or repair. I have done this many times, and it works fine.
Why does my belt sander keep breaking belts?
Heat, humidity, and age can contribute to belt seam failures, but they’re not the only causes. Check that your belts are turning in the direction indicated on the inside face. When not using your sander, release the tension on the belt.
How do you glue sanding belts back together?
Lay one end of the belt, grit-side down, on the bench; then apply cyanoacrylate glue to the end of the belt. Lay half of the bias tape’s width on the glue, place waxed paper over the tape, and use a weight to press down on it for about 30 seconds, or until the glue sets.