First, cut your sandpaper to width i cut mine to 10cm of 4 inches. Now, a measuring tape can be used to measure and cut the final length of the sandpaper. With the tape holding the sandpaper together the plastic backed paper can be glued to the sandpaper.
07-09-2009, 12:35 PM #1 Homemade Sanding Belts I’ve been making my own 1″X 42″ sanding belts from 1″ emery rolls. 07-16-2009, 07:54 AM #6. 07-16-2009, 08:07 AM #7 I’ve been making my own 1″X 42″ sanding belts from 1″ emery rolls. I have finally had success with making belts and re-gluing old belts with Gorilla glue.
While manufacturers try to make them sound more fancy and sophisticated, sanding belts are simply strips of coarse and abrasive paper and even cloth. Now there’s nothing wrong with buying sanding belts that are ready-made; the point is, if you’re in a pinch, or if you happen to have extra sanding rolls around, then you can make some on your own. If you have a used belt lying around, you can use it as a guide for you to prepare your own belts from scratch.
Most sanding belts are now made with a diagonal splice joint that is held together with a strong piece of special tape. Then use CA adhesive to bind the bias binding tape to the cleaned edges of the sanding belt you want to make or repair. His solution is to store new and used belt sander belts in sealable freezer bags until he’s ready to use them.
can you make your own sanding belts Related Question:
What is best material for a sanding belt?
Most commonly found on wet & dry sanding sheets, Silicon Carbide is the grain of choice for belt sanding glass, plastic, rubber, ceramic or other masonry type materials. It is also very popular in the very high grits for fine finishing on both metal and wood.
What tape is used to make sanding belts?
Apply the Scotch 8959 tape by using a small piece of swimming pool noodle or other firm foam/rubber like a squeegee pressing firmly and leaving overlap on both ends, make sure there are no air bubbles and the tape is perfectly flat covering both splice ends equally.
Can you make your own belt sander?
Building a belt sander is a relatively simple project. You will need to gather some basic materials, such as a motor, pulleys, belts, and bearings.