In order to make a biscuit joint, it’s imperative that your biscuit jointer is set to the correct size of biscuit you’ll be inserting into the slot. Equally, setting up the biscuit jointer to the correct height for the cut is important. A good quality biscuit jointer will provide you with a clear line of sight for your cut, per the Makita PJ7000.
Years ago, back in the 1990s and early 2000s, a biscuit joiner became a very popular woodworking tool. Well, as much as I admire Norm Abram, a biscuit joiner may be one of the most useless power tools you can own. If you’re new to woodworking, or if you’re a maker, you may not even know what a biscuit joiner is.
A biscuit joiner or biscuit jointer is a woodworking tool used to join two pieces of wood together. In the succeeding years there followed further developments such as the circular saw and the first stationary biscuit joining machine in 1956 followed by the first portable biscuit joiner for Lamello grooves in 1968. D Furniture hinge Depth of groove: 13 mm Use only on biscuit joiner with six-depth setting S Slide-in connector Depth of groove : 14.7 mm Use only on biscuit joiner with six-depth setting S6 85 30 4 mm‡.
When adjusted properly, the biscuit joiner will cut a slot 1/32″ deeper than half the width of your biscuit. As you begin to setup for your cut, start by carefully positioning the biscuit joiner to align with your biscuit placement mark. Once you get solid placement of the biscuit joiner and fence, find the detent on your biscuit joiner’s fence, place your thumb firmly on the detent, and let go of the handle to allow the biscuit joiner to “Bottom out” on the work piece.
For tabletops, biscuit joints between boards are much faster than milling tongue-and-groove joints on a router table. Biscuit joints get a bit of criticism for their strength, but there are quite a few applications where biscuit joints are ideal. Biscuit joints can also strengthen an end-to-end butt joint, giving the glue in the joint something more than just the end grain to adhere to.
what does a biscuit joiner do Related Question:
Are biscuit joiners worth it?
Biscuits joints serve best as a quick and easy way to keep glue-up parts in alignment, and that they add appreciable pull-apart to strength joints that would be otherwise too weak to stand on their own – like butt joints and miter joints.
What are the disadvantages of a biscuit joint?
Biscuit joints do not stand up well against other joinery methods. We won’t spend any time comparing with mortise and tenon joints because all other joinery methods pale in comparison when measuring strength. But, as an example, the use of dowels as opposed to biscuits is a step up in strength.