In this case, 7.0 amp. Half-inch drill/driver with 3, 100 RPMs and 52, 700 bpms can do any job with ease.
Keyed chuck for better bit retentio.
Locked-on trigger for long-term work.
It can be used with the versa-track system to organize your walls. Hook and other items are sold separately.
In the “Warranty & Support” section below, you can find more information about the warranty and support.
In this CRAFTSMAN 7.0-amp hammer drill, there is a 1/2in. Chuck that can hold a wide range of drill bits for different jobs. The 7.0 amp motor has enough power to quickly drill through wood and masonry.
It’s a great deal on a very good drill.
When you start with a small concrete drill and work your way up to the finished diameter an eighth or a quarter of an inch at a time, it works best.
Before I started drilling, I found that measuring and marking all the holes I was going to drill made it easier for me.
“Measure twice, then drill once..
It looked to me like the drill went through cement like a hot knife went through butter.
The job was done quickly.
Make sure your work area is clean with a hose.
This will help you clean up: get rid of the dust outside.