Biscuits used to join pieces of wood are oval-shaped, thin, dried, and compressed bits of wood or wood shavings, often made with beech wood. A tool known as a biscuit joiner cuts a slot into each of the two pieces of wood to be joined, adds glue to the slots, inserts the biscuit into one and then the other to join the pieces together. The biscuit joiner aligns the slots precisely so that when the two pieces of wood are clamped together, the edges align perfectly, and the wood’s plane is maintained.
Such as the dowel joint and the miter joint, dovetail joints, half-lap joints, mortise and tenon joints. All things considered, the dowel joint is a good alternative to the biscuit joint. The half-lap joint requires more skill and time than the joints we talked about before.
I’m trying to make a jewelry box for my girlfriend and the plans I’m using call for screws but I’d like to do it without screws. Worst comes to worst I’ll use dowels instead, but I’d like to try using biscuits. Edit: Thanks for all the suggestions guys, I’m going to go with dowels and buying a jig kit so I don’t drill it poorly.
what to use instead of biscuit joiner Related Question:
Is a biscuit joiner necessary?
Biscuits can be used to join the ends of boards to edge or face grain. They will definitely provide more strength than glue alone, but not a lot. If your boards are too narrow, you can reinforce the joint by adding the biscuit on the back side of the face.
Can I use a router instead of a biscuit joiner?
If you want to make biscuit joints, you don’t have to buy a biscuit joiner. In most cases, a router equipped with a 5/32-in. slot bit can cut perfect slots to fit the biscuits. Mark the biscuit positions on both adjoining boards as you would with a biscuit joiner.