Briefly said, the best biscuit joiners will precisely align and cut holes in two pieces of wood into which you may bond and attach a biscuit. That being said, before you go out and buy any old biscuit joiner, there are a few characteristics you should look for in the finest biscuit joiners. Biscuit joiners come with one of 2 handle patterns: a barrel grip where the tool’s body is intended to hold or a D-handle.
“The slot for a #0 biscuit measures about 21⁄8” wide, so you can’t hide a biscuit joint in stock narrower than this. Even a well-tuned biscuit joiner can sometimes cut slots that result in a non-flush-fitting joint. Cutting the spline slots on your tablesaw requires a tall jig, but you can cut them easily and quickly with your biscuit joiner and the attached fence jig, see drawing below.
One of the best biscuit joiners you can use to make biscuit joints during your woodworking projects is the REXBETI REX031. Equipped with a hard 4 inch tungsten carbide tipped blade, the Vonhause 8.5 amp biscuit plate joiner offers one of the best solutions you can use for cutting slots for your biscuit joints. The adjustable fence allows you to set it at different angles and cut your biscuit slots easily, and there are preset depth stops for cutting slots for commonly used biscuit sizes of 0, 10 and 20 accurately.
By using small circular saw blades, biscuit joiners allow you to easily create shallow, crescent-shaped slots in any two wood pieces that you’re planning to join together. What to ConsiderBiscuit joiners might look similar-and essentially they are-but there are a few key differences that could help you choose the one that’s best for you. If you plan on using biscuit joinery frequently, like if you have a part-time woodworking business, you’ll want to invest in a machine that can deliver quick and consistent results.
best biscuits for biscuit joiner Related Question:
Are biscuit joiners worth it?
Biscuits joints serve best as a quick and easy way to keep glue-up parts in alignment, and that they add appreciable pull-apart to strength joints that would be otherwise too weak to stand on their own – like butt joints and miter joints.
What are biscuit joiners good for?
Biscuits are predominantly used in joining sheet goods such as plywood, particle board and medium-density fibreboard. They are sometimes used with solid wood, replacing mortise and tenon joints, as biscuit joints are easier to make and almost as strong.
How strong is a #20 biscuit?
Biscuits don’t really have much to offer in the way of strength. Here’s why: – Biscuits slots can be a little tight or a little loose, depending on your machine and how steady your hand is. – The biscuit doesn’t penetrate very far into the joining workpieces: a #20 biscuit will penetrate less than 1/2″.