Plate joiners are particularly useful power tools for carpenters and woodworkers, as well as DIY enthusiasts who like to join different pieces of wood together to create furniture or other accessories. Cutting depth is one of the key factors, and most models of plate joiners have preset levels to choose from, such as #0, #10, and #20. These are the most common biscuit sizes, and they allow you to quickly set the depth. Most plate joiners have a cutting speed of 10000 or 11000 RPM, which is suitable for cutting through harder materials as well.
One of the best biscuit joiners you can use to make biscuit joints during your woodworking projects is the REXBETI REX031. Equipped with a hard 4 inch tungsten carbide tipped blade, the Vonhause 8.5 amp biscuit plate joiner offers one of the best solutions you can use for cutting slots for your biscuit joints. The adjustable fence allows you to set it at different angles and cut your biscuit slots easily, and there are preset depth stops for cutting slots for commonly used biscuit sizes of 0, 10 and 20 accurately.
best plate joiner kit Related Question:
Are plate joiners worth it?
They will definitely provide more strength than glue alone, but not a lot. If your boards are too narrow, you can reinforce the joint by adding the biscuit on the back side of the face. But again, I would prefer to just use pocket screws, dados, or rabbets.
What is the difference between a plate joiner and biscuit joiner?
A plate joiner is the same as a biscuit joiner and are used to create an oblong hole in two matching pieces of wood. After the joiners have created the hole, a biscuit is glued, inserted and typically clamped until the wood is dried.