Change to Lee Valley Canada website to see content specific to that region and the best shipping options. These are good-quality hardwood biscuits from Europe. Available in standard sizes #0, #10 and #20. “All are 5/32” thick.
Biscuit joinery is a fast and accurate method of making edge joints. These die-cast biscuit halves can be used to make permanent or dismountable hidden joints. For a permanent joint, integral tabs in the biscuit body can be bent out to prevent the halves from sliding.
biscuit joiner lee valley Related Question:
Are biscuit joiners worth it?
Biscuits joints serve best as a quick and easy way to keep glue-up parts in alignment, and that they add appreciable pull-apart to strength joints that would be otherwise too weak to stand on their own – like butt joints and miter joints.
What is the difference between a biscuit joiner and a Domino joiner?
While a biscuit joiner will AT MOST go 1/2″ into each side of the wood, a domino joiner will go almost 3″ into each side (remember, 1/2″ the tenon length goes into each piece). Which means a domino joiner will assist with both alignment AND structural rigidity of the joints.
What can I use instead of a biscuit joiner?
Some tests suggest a dowel joint will provide stronger joinery than biscuits. Tests also indicate that dowel joints are not as strong as tenon joints or dovetail joints. They do make solid and accurate joints, though. A dowel joint will be a better method than nails or screws and are much less susceptible to breakage.
What is the difference between a plate joiner and biscuit joiner?
Biscuit joiner” and “Plate joiner” are different names for the same woodworking tool. The term “biscuit joiner” is more widely used in the United States while in the UK and Europe it is often referred to as a Plate joiner. A biscuit joiner can sometimes also be called a biscuit jointer.