“The slot for a #0 biscuit measures about 21⁄8” wide, so you can’t hide a biscuit joint in stock narrower than this. Even a well-tuned biscuit joiner can sometimes cut slots that result in a non-flush-fitting joint. Cutting the spline slots on your tablesaw requires a tall jig, but you can cut them easily and quickly with your biscuit joiner and the attached fence jig, see drawing below.
Biscuit joiners are great for when you want to securely fasten a butt joint on your woodworking projects. George Vondriska teaches you how to use the biscuit joiner to attach a shelf at a 90-degree angle to the face of another board.
Years ago, back in the 1990s and early 2000s, a biscuit joiner became a very popular woodworking tool. Well, as much as I admire Norm Abram, a biscuit joiner may be one of the most useless power tools you can own. If you’re new to woodworking, or if you’re a maker, you may not even know what a biscuit joiner is.
how to use a wood biscuit joiner Related Question:
Can a biscuit joiner be used on plywood?
However, with a biscuit joiner, clean, unobtrusive joints can be made in plywood, with no visible hardware and clean edges coming together. Whether joined together at 0 degrees, 45 degrees or 90 degrees, all joints are clean and tight, as well as being strong.
Are biscuit joiners worth it?
Biscuits joints serve best as a quick and easy way to keep glue-up parts in alignment, and that they add appreciable pull-apart to strength joints that would be otherwise too weak to stand on their own – like butt joints and miter joints.