A biscuit joiner or biscuit jointer is a woodworking tool used to join two pieces of wood together. In the succeeding years there followed further developments such as the circular saw and the first stationary biscuit joining machine in 1956 followed by the first portable biscuit joiner for Lamello grooves in 1968. D Furniture hinge Depth of groove: 13 mm Use only on biscuit joiner with six-depth setting S Slide-in connector Depth of groove : 14.7 mm Use only on biscuit joiner with six-depth setting S6 85 30 4 mm‡.
When adjusted properly, the biscuit joiner will cut a slot 1/32″ deeper than half the width of your biscuit. As you begin to setup for your cut, start by carefully positioning the biscuit joiner to align with your biscuit placement mark. Once you get solid placement of the biscuit joiner and fence, find the detent on your biscuit joiner’s fence, place your thumb firmly on the detent, and let go of the handle to allow the biscuit joiner to “Bottom out” on the work piece.
“The slot for a #0 biscuit measures about 21⁄8” wide, so you can’t hide a biscuit joint in stock narrower than this. Even a well-tuned biscuit joiner can sometimes cut slots that result in a non-flush-fitting joint. Cutting the spline slots on your tablesaw requires a tall jig, but you can cut them easily and quickly with your biscuit joiner and the attached fence jig, see drawing below.
Years ago, back in the 1990s and early 2000s, a biscuit joiner became a very popular woodworking tool. Well, as much as I admire Norm Abram, a biscuit joiner may be one of the most useless power tools you can own. If you’re new to woodworking, or if you’re a maker, you may not even know what a biscuit joiner is.
what do you use a biscuit joiner for Related Question:
When should I use a biscuit joiner?
Biscuits joints serve best as a quick and easy way to keep glue-up parts in alignment, and that they add appreciable pull-apart to strength joints that would be otherwise too weak to stand on their own – like butt joints and miter joints.
What is the purpose of a biscuit joint?
A biscuit jointer, sometimes referred to as a biscuit joiner, cuts notches in both pieces of wood you wish to join, into which you insert and glue a biscuit. The resultant joints are strong and reliable, preventing any lateral movement in your workpiece.
What are the disadvantages of a biscuit joint?
Biscuit joints do not stand up well against other joinery methods. We won’t spend any time comparing with mortise and tenon joints because all other joinery methods pale in comparison when measuring strength. But, as an example, the use of dowels as opposed to biscuits is a step up in strength.