“The slot for a #0 biscuit measures about 21⁄8” wide, so you can’t hide a biscuit joint in stock narrower than this. Even a well-tuned biscuit joiner can sometimes cut slots that result in a non-flush-fitting joint. Cutting the spline slots on your tablesaw requires a tall jig, but you can cut them easily and quickly with your biscuit joiner and the attached fence jig, see drawing below.
Years ago, back in the 1990s and early 2000s, a biscuit joiner became a very popular woodworking tool. Well, as much as I admire Norm Abram, a biscuit joiner may be one of the most useless power tools you can own. If you’re new to woodworking, or if you’re a maker, you may not even know what a biscuit joiner is.
Because biscuit joints are easy to mark out and quick to cut, using one almost seems like cheating. The safest way to cut biscuit slots is with a biscuit joiner. The oversized slot lets the biscuit move slightly, enabling you to tweak parts into perfect alignment.
how to use a biscuit plate joiner Related Question:
Is a plate joiner the same as a biscuit joiner?
A plate joiner is the same as a biscuit joiner and are used to create an oblong hole in two matching pieces of wood. After the joiners have created the hole, a biscuit is glued, inserted and typically clamped until the wood is dried.