Because biscuit joints are easy to mark out and quick to cut, using one almost seems like cheating. The safest way to cut biscuit slots is with a biscuit joiner. The oversized slot lets the biscuit move slightly, enabling you to tweak parts into perfect alignment.
“The slot for a #0 biscuit measures about 21⁄8” wide, so you can’t hide a biscuit joint in stock narrower than this. Even a well-tuned biscuit joiner can sometimes cut slots that result in a non-flush-fitting joint. Cutting the spline slots on your tablesaw requires a tall jig, but you can cut them easily and quickly with your biscuit joiner and the attached fence jig, see drawing below.
Years ago, back in the 1990s and early 2000s, a biscuit joiner became a very popular woodworking tool. Well, as much as I admire Norm Abram, a biscuit joiner may be one of the most useless power tools you can own. If you’re new to woodworking, or if you’re a maker, you may not even know what a biscuit joiner is.
As intimidating as a biscuit joiner may seem, it’s one of the best options for getting a seamless joint. In this tutorial, we are going to show you how to use a biscuit joiner along with some of the most important tips for getting perfect wood joints. You’ll then line the mark on the biscuit joiner that indicates the center of the blade with the line that you drew on the board.
Most of the wood I use the biscuit joiner on is inch solid stock. The housing surrounding the blade on the biscuit joiner is almost inch thick. Place the wood being joined on another piece so that it is high enough off the work surface to insure a comfortable gap between the joiners base and the work surface and all is well in biscuit joining land.
biscuit joiner 90 degree Related Question:
Can you use a biscuit joiner to make 90 degree joints?
Biscuit joiners are great for when you want to securely fasten a butt joint on your woodworking projects. George Vondriska teaches you how to use the biscuit joiner to attach a shelf at a 90-degree angle to the face of another board.
Can you biscuit joint a 45 degree angle?
Mark the center lines for each biscuit to align with the biscuit joiner. Most biscuit joiners have a variety of fence positions; on a 45-degree miter, the fence should be on the 45-degree setting. After test cuts, it is a very fast operation!
Can you use a biscuit joiner on mitered corners?
face miters A few biscuits can solve both problems. They can register the ends so that the corners can’t slip during clamp-up and strengthen the otherwise end-grain joint. A biscuit-reinforced miter is as strong as a full table saw-cut spline, but biscuits can be hidden within the miter for a cleaner-looking joint.