01-08-2007, 2:00 PM #1 Alright it was only $120, but this is a very unimpressive tool, and that is real money in my book for a simple tool. The dust collection port clogs on the first cut and the bag does not inflate as there is a 1/8+ gap in the housing under the collection port. Busy scanning the “Honey do” list for tool buying opportunities.
freud js102 4 biscuit joiner Related Question:
Are biscuit jointers any good?
The DW682K proved accurate in every cut we made, with spot-on slot placement and biscuit fit. And it has a smooth plunge action. The lightest tool in the test at just under 7 pounds, it feels nicely balanced with a comfortable grip. Still, it has a few issues.
What is the difference between a plate joiner and biscuit joiner?
A plate joiner is the same as a biscuit joiner and are used to create an oblong hole in two matching pieces of wood. After the joiners have created the hole, a biscuit is glued, inserted and typically clamped until the wood is dried.
How strong is biscuit joint?
When done correctly, a biscuit joint is at least as strong as a similar size mortise and tenon joint, and decidedly stronger than a dowel joint.”
What can I use instead of a biscuit joiner?
Some tests suggest a dowel joint will provide stronger joinery than biscuits. Tests also indicate that dowel joints are not as strong as tenon joints or dovetail joints. They do make solid and accurate joints, though. A dowel joint will be a better method than nails or screws and are much less susceptible to breakage.
Who makes a cordless biscuit joiner?
The Makita cordless biscuit joiner has some real nice tool-less adjustment features. The rack and pinion fence system easily adjusts with a turn knob on the right hand side that ranges from 0″ to 1-1/2″ and a pivot fence that has three positive stops at 0°, 45° and 90°.
What are the disadvantages of a biscuit joint?
Biscuit joints do not stand up well against other joinery methods. We won’t spend any time comparing with mortise and tenon joints because all other joinery methods pale in comparison when measuring strength. But, as an example, the use of dowels as opposed to biscuits is a step up in strength.
Do biscuits add strength?
Some folks (including me) may use biscuits for alignment or “reinforcement”, but the truth is they do very little to strengthen the joint. In this long-grain situation, its really the glue that’s doing all the work. As you have heard me and others say many times, the glue joint is stronger than the wood itself.
When would you use a biscuit joiner?
A biscuit joiner or biscuit jointer (or sometimes plate joiner) is a woodworking tool used to join two pieces of wood together. A biscuit joiner uses a small circular saw blade to cut a crescent-shaped hole (called the mouth) in the opposite edges of two pieces of wood or wood composite panels.
What is the strongest wood joint?
Mortise and Tenon Woodworking Joints One of the strongest woodworking joints is the mortise and tenon joint. This joint is simple and strong. Woodworkers have used it for many years. Normally you use it to join two pieces of wood at 90-degrees.
Is a rebate joint as strong as a butt joint?
The advantage that the shoulder joint has over the butt joint is its strength as the rebate provides a much greater fixing area and, once glued, forms a solid corner. If you need even more strength in your joint you can combine the adhesive with screws, nails or even dowels that will further reinforce your corners.
Are biscuit joiners worth it?
They will definitely provide more strength than glue alone, but not a lot. If your boards are too narrow, you can reinforce the joint by adding the biscuit on the back side of the face. But again, I would prefer to just use pocket screws, dados, or rabbets.
How much space do you need between biscuit joints?
Biscuit Spacing Once you’ve determined the positions for the edge biscuits, you can calculate even spacing for the biscuits between the edges. Anywhere from 6 to 12 inches apart, measured on-center is usually sufficient.
Can you use a biscuit joiner to make 90 degree joints?
Biscuit joiners are great for when you want to securely fasten a butt joint on your woodworking projects. George Vondriska teaches you how to use the biscuit joiner to attach a shelf at a 90-degree angle to the face of another board.
What causes the biscuit joint to tighten up?
The biscuits themselves are compressed and expand when they come in contact with white or yellow glue, thus fitting more tightly after glue-up than before.
Can you biscuit joint plywood?
However, with a biscuit joiner, clean, unobtrusive joints can be made in plywood, with no visible hardware and clean edges coming together. Whether joined together at 0 degrees, 45 degrees or 90 degrees, all joints are clean and tight, as well as being strong.