Hi: I have a lamello biscuit joiner, it’s the second one I have owned. The first was bought at a woodworking show when the only machines available wwas the lamello, and the Viratex, the Viratex had slop in the slide, and was’nt made as well but the price was half of the lamello. I now have the new Lamello, and I’m very satisfied with them.
Folks -I’ve got an old Porter Cable model 555 biscuit joiner, and recentlywent looking for new blades. You might try with Freud…I think that I remember that Freud made a replacement blade for the 555. It might be academic, but a biscuit joiner is one of the few tools I can think of where the diameter of the blade is important to the final fit.
porter cable biscuit joiner model 555 Related Question:
What is the difference between a plate joiner and biscuit joiner?
A plate joiner is the same as a biscuit joiner and are used to create an oblong hole in two matching pieces of wood. After the joiners have created the hole, a biscuit is glued, inserted and typically clamped until the wood is dried.
How does plate joiner work?
A plate joiner is a handy power tool that is fitted with a circular saw and helps you cut a circular hole into the surface of the wood pieces, which can then be joined together with the help of a wooden disc, which is also called a biscuit and slides into the holes of both wood pieces when they are placed together.
Which is stronger dowel or biscuit joint?
When done correctly, a biscuit joint is at least as strong as a similar size mortise and tenon joint, and decidedly stronger than a dowel joint.”
Are biscuit joiners worth it?
They will definitely provide more strength than glue alone, but not a lot. If your boards are too narrow, you can reinforce the joint by adding the biscuit on the back side of the face. But again, I would prefer to just use pocket screws, dados, or rabbets.
Who makes a cordless biscuit joiner?
The Makita cordless biscuit joiner has some real nice tool-less adjustment features. The rack and pinion fence system easily adjusts with a turn knob on the right hand side that ranges from 0″ to 1-1/2″ and a pivot fence that has three positive stops at 0°, 45° and 90°.
What are the disadvantages of a biscuit joint?
Biscuit joints do not stand up well against other joinery methods. We won’t spend any time comparing with mortise and tenon joints because all other joinery methods pale in comparison when measuring strength. But, as an example, the use of dowels as opposed to biscuits is a step up in strength.
How do I know what size biscuits to use?
What Size Biscuit to Use. As a general rule, try to use the largest size biscuit possible, as this will provide the greatest amount of strength to the joint. In most cases, use #20 biscuits, but when working on narrower material, switch to smaller biscuits where appropriate.
What is the strongest wood joint?
Mortise and Tenon Woodworking Joints One of the strongest woodworking joints is the mortise and tenon joint. This joint is simple and strong. Woodworkers have used it for many years. Normally you use it to join two pieces of wood at 90-degrees.
Who makes a Domino joiner?
A Festool DOMINO joiner is a power tool used to drill a mortise into two matching pieces of wood or plywood.
Does Dewalt make a jointer?
Routers, Planers, & Jointers | DEWALT.
Does Bosch make a biscuit joiner?
GFF 22 A Biscuit Joiner | Bosch Professional.
What can I use instead of a biscuit joiner?
Some tests suggest a dowel joint will provide stronger joinery than biscuits. Tests also indicate that dowel joints are not as strong as tenon joints or dovetail joints. They do make solid and accurate joints, though. A dowel joint will be a better method than nails or screws and are much less susceptible to breakage.
What size is a biscuit cutter?
Though we tried every cutter in each set, most biscuit recipes call for a 2-, 2½-, or 3-inch biscuit cutter.
How deep does a biscuit joiner cut?
When adjusted properly, the biscuit joiner will cut a slot 1/32″ deeper than half the width of your biscuit. The additional 1/32″ provides a little wiggle room, as well as room for glue. If it is set too deep, the biscuits will be too far embedded on one piece, and won’t deliver the holding power that we want.