Access to this page has been denied because we believe you are using automation tools to browse the website. Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading.
Includes 4″ diameter blades for standard biscuit cutting. Spindle lock feature allows for single wrench bit changes. Plate joiner, 4″ blade #5558, centering plate #888776, dust bag #883175, chip deflector #886490, Allen wrench #891869, carrying case, and operating manual.
porter-cable 7.5-amp biscuit joiner Related Question:
What is the difference between a plate joiner and biscuit joiner?
A plate joiner is the same as a biscuit joiner and are used to create an oblong hole in two matching pieces of wood. After the joiners have created the hole, a biscuit is glued, inserted and typically clamped until the wood is dried.
Are biscuit joiners worth it?
Biscuits joints serve best as a quick and easy way to keep glue-up parts in alignment, and that they add appreciable pull-apart to strength joints that would be otherwise too weak to stand on their own – like butt joints and miter joints.
Are all joiner biscuits the same thickness?
Blades and depth. For most portable plate joiners, a nominal 4 inch or 100 mm diameter blade is used for the #0, #10, #20 biscuit cuts. The blade is set deeper for joining the larger biscuits. Most blades have 4, 6, or 8 teeth and fit a 7⁄8 inch or 22 mm arbor.
What are the disadvantages of a biscuit joint?
Biscuit joints do not stand up well against other joinery methods. We won’t spend any time comparing with mortise and tenon joints because all other joinery methods pale in comparison when measuring strength. But, as an example, the use of dowels as opposed to biscuits is a step up in strength.
Are dominoes better than biscuits?
The biscuit joiner cutter is shallower than the domino limiting the lateral strength compared to Festool Domino. Biscuits are made from beech wood and have a short grain which is not as strong as a timber with a straight grain which I make my Festool dominos from. The Festool Domino has a greater glue area.
How does plate joiner work?
A plate joiner is a handy power tool that is fitted with a circular saw and helps you cut a circular hole into the surface of the wood pieces, which can then be joined together with the help of a wooden disc, which is also called a biscuit and slides into the holes of both wood pieces when they are placed together.
What can I use instead of a biscuit joiner?
Some tests suggest a dowel joint will provide stronger joinery than biscuits. Tests also indicate that dowel joints are not as strong as tenon joints or dovetail joints. They do make solid and accurate joints, though. A dowel joint will be a better method than nails or screws and are much less susceptible to breakage.
What is stronger dowels or screws?
Dowel Strength Dowel joinery is stronger than screw joinery. The increased glue surface caused by the glue deeply penetrating the wood gives the dowel more holding power. The clamp and dry method used in dowel construction ensures that the joint is sufficiently set before the next step in building the item is taken.
Can a router be used as a biscuit joiner?
If you want to make biscuit joints, you don’t have to buy a biscuit joiner. In most cases, a router equipped with a 5/32-in. slot bit can cut perfect slots to fit the biscuits. Mark the biscuit positions on both adjoining boards as you would with a biscuit joiner.
How thick is a no 20 biscuit?
No. 20 beech jointing biscuits for board thickness of 19mm. Ideal for softwoods, hardwoods, plywood and composition board.
How thick should wood be for a biscuit joiner?
Typically, you’ll center the slot in the wood. The joiner’s base, when sitting on a flat surface, is preset to center the cut in 3/4″-thick stock.
How do I know what size biscuits to use?
What Size Biscuit to Use. As a general rule, try to use the largest size biscuit possible, as this will provide the greatest amount of strength to the joint. In most cases, use #20 biscuits, but when working on narrower material, switch to smaller biscuits where appropriate.
How can butt joints be strengthened?
Butt joints should be reinforced with screws or nails to strengthen the joint. Typically, this reinforcement is done by driving the fasteners through one piece of stock near the end and into the end grain of the adjoining piece of stock.
What makes a biscuit joint so strong?
The real magic of the mortise and tenon joint is that it takes this end grain to long-grain union and converts it to long-grain to long-grain, simply by inserting one piece into the other. As a result, the joint has a great deal of glue surface and strength.
What is a rabbet joint?
A rabbet is basically just a groove or a dado on the edge of your wood piece that creates a lip. That lip can then fit snuggly into a groove. The rabbet joint is incredibly useful for furniture construction that uses panels, such as a small dresser. It’s also very useful for cabinet construction.