Homeowners wishing to do their own tile work have two tools at their disposal to cut the tiles: wet tile saw or tile snap cutter. A tile snap cutter is closer to a glass cutter than it is to the other tool for cutting tile, the wet tile saw. Wear Safety Glasses: Though tile snap cutters don’t produce the fast-moving shards of tile like wet tile saws do, they still can shoot pieces of tile in your direction.
Snap tile cutter on the other hand majorly resembles a glass cutter. The saw doesn’t cut as straight as a wet tile saw, and hence the wet tile saw is always used by the professionals. When a tile comes larger than12″ to 16″ it is difficult to cut the piece using the snap cutter.
An expert DIY guide on the best ways to cut ceramic tile, using a manual snap cutter, tile nippers, and wet saws for different tile cutting techniques. To make a cut that a snap cutter can’t make-usually 1/2 inch or less from a tile’s edge-use a tile nippers after scoring the line with the snap cutter. Mark your cutting line on the surface of the tile and cut the tile right-side up.
A tile nipper, also known as a nibbling tool, will help you to cut tile in small snips, which is difficult to do with larger tools. Cutting curved glass is another challenge if you’re not sure which tools you need! Yes, using a wet saw for glass tile is a time-effective method to get clean glass edges and reduce the risk of damaging glass tiles. As you can see, there are various tools to use for cutting tiles based on the type and number of tiles, as well as the kinds of cuts you want to make.
how to cut ceramic tile with a snap cutter Related Question:
Do tile snap cutters work?
Professionals often use both a tile snap cutter and a wet tile saw. The tile snap cutter helps tile workers make lots of cuts in tile. Plus, they can make these cuts in the installation area, not off to the side or outdoors (since it’s best to use wet tile saws outdoors).
How do you score a snap tile without a tile cutter?
Hold the tile tightly with your other hand and press the pencil downward to snap off the scored part of the tile, or use tile nippers as a stronger alternative if one’s handy. You can then sand the edge smooth with a medium-grit rubbing stone.