Its an old saw by todays standards, anti vibe is not so good but they are a good powerful older saw. I just did a refurbish on one putting in seals, oil pump O ring and to case seal, replaced and rethreaded all the screws to hold the top cover and recoil on, used Stihl screws so they won`t back out. My cutting buddy runs them, 266 SE and XP`s , I do most of the repair and upkeep on them, have to say they are good saws for the money, just not as smooth as the more modern saws in that line.
ST on the right side of the carb it has the numbers HS101A. 79 TJ 225 81 JD 540B Husky and Jonsered saws. ST on the right side of the carb it has the numbers HS101AIt’s sort of an enigma right there;. There is the possibility that Husky used other carbs than those listed in documents, specially in a transition period, when they were about to standardize a different carb than earlier.
266 se husqvarna chainsaw Related Question:
How many cc’s is a Husqvarna 266 SE?
This Husqvarna saw boasts a 4.5 horsepower engine with a displacement of 66.7 cc, giving you enough power for small and medium sized applications. A guide bar of 15 inches of this chainsaw is great for gardening or cutting up small trees.
How many cc’s is a Husqvarna 266xp?
Re: Husqvarna 266xp The 266 SE/SG, 66.7 cc, 4.0 cu.in, no hp rating ? I used swap parts between the 266 Husqvarna and the 630 Jonsereds, fuel tank, head and pistons.
What is the Husqvarna E Series chainsaw?
The Husqvarna E-Series improves felling precision by adding distinct marks to the saw. A visible fuel level makes it easy to check fuel levels. The ergonomic rear handle features a soft inlay, ergonomic trigger, and asymmetrical grip, making this saw as comfortable as it is efficient.
How many cc is a Husqvarna 562XP?
Husqvarna 562XP (20″) 59.8cc Professional Chain Saw, 3/8″ .
Is Husky 450 a pro saw?
The Husqvarna 450 is a mid-length Pro-level chainsaw for tree service crews and foresters. It’s also a great all-rounder for property owners who need a powerful saw for general maintenance and storm clean-up.
What size chain does a Husqvarna 240 take?
3-Pack 18″ Semi Chisel Saw Chain for Husqvarna 240 Chainsaws – (18 inch, 3/8″ Low Profile Pitch, 0.050″ Gauge, 62 Drive Links, CSC-S62) – UpStart Components.
How many cc is a Husqvarna 450 chainsaw?
Husqvarna 450 Rancher 20-in 50.2-cc 2-Cycle Gas Chainsaw.
Why will my Husqvarna chainsaw not start?
The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the chainsaw for a long period of time. Over time, some of the ingredients in the fuel will evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and prevent the engine from starting.
What is the button on top of a Husqvarna chainsaw?
What is a decompression valve? A decompression valve releases some of the compression from the combustion chamber during the starting procedure, making the engine easier to turn over when pulling the recoil rope.
What does XP mean on Husqvarna?
XP® chainsaws have larger transfer ports, which carry. more fuel and air mixture, creating more acceleration. and torque where you need it.May 7, 2019
How big of a bar can I put on a Husqvarna 61?
Cutting Equipment The Husqvarna 61 can be outfitted with bars 15 to 20 inches in length. Using a longer bar, like the 20-inch bar, will allow you to cut wider trees than using shorter bars.
Is the Husqvarna 61 a pro saw?
One of Husqvarna’s classic all-round saws for professional applications that require high power, making this saw especially suited to felling tasks.
What size chain does a Husqvarna 61 use?
16-Inch Chainsaw Chain Replacement for Husqvarna 61 – (16″, 3/8″, . 050″, 60 Drive Links)
Do they make electric start chainsaws?
We hate to inform you, but gas chainsaws with automatic electric-start systems don’t exist. The mechanism that keeps the saw running—the gas engine—is the same mechanism that gives it the power to start. A special spring is probably the most common easy-start feature you’ll find on chainsaws.
What is the T adjustment on a Husqvarna chainsaw?
The T screw regulates how much fuel is sent to the carburettor while idling until the throttle is pressed. L Screw – With the chainsaw still running, take a screwdriver and turn the L screw clockwise. Keep turning it until the engine almost stops turning.