The Husqvarna 359 is a popular 59cc, 3.6 hp chainsaw that can be difficult to find. You cannot buy a new Husqvarna 359 chainsaw as they were discontinued, along with the 357 XP, in 2011 with the release of the Husqvarna 500 series. Husqvarna 359 E-TECH. Husqvarna 359 G. And the Husqvarna 359 G E-TECH. You can find out more about the different Husqvarna designations here, but the ‘G’ indicates heated handles and/or carb.
68 l.Chain tensionside access Oil pumpautomatic, adjustable Oil tank volume0. Outdoor-Power-Equipment.net is an online chainsaw database established in 2006. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you.
Recommended original and replacement bar and chain combinations. Listed combinations of bars and chains for chain saw models Husqvarna 357XP and 359. The kickback requirements when equipped with the listed bar and chain combinations.
Jonsered 2159 is the same saw as the Husky 359 – apparently Jreds are cheaper than huskies in some parts, so that might offer you the best all around deal. Jonsered and Husqvarna are both made by Husqvarna factory, Jonsered put other hoods and covers on their saws which make them feel different from Husky – But as stated above, it’s the same saw. If Woodhog is correct, about the 359 not quite having the power you might need, Treebeard, but your budget is limited, I wonder if you should look at a saw like the Stihl 390.
359 husqvarna chainsaw specs Related Question:
What replaced the 359 Husqvarna?
Husqvarna 450 The modernized and updated version of the 359 is the 450. This medium-sized chainsaw is one of the best Husqvarna’s available at the moment.
What is the H and L on a Husqvarna chainsaw?
1. Locate the idle-speed screw and the idle-mixture screws on the side of the chainsaw. According to the manual for the Husqvarna 51 available at ManualsLib, the idle-speed screw is labeled “T,” the low-speed screw is labeled “L” and the high-speed screw is labeled “H.”
What chainsaw did Leatherface use?
The chainsaw used by Leatherface in the “Chainsaw Massacre” was a Poulan 306a. In the movie there was a piece of black tape over the brand name but the green case gives it away. The Poulan 306a was introduced in 1970 and produced until 1980.
How many cc’s is a Husqvarna 257?
The Husqvarna 257 chainsaw is Packed with user friendly features to improve the speed and performance of your cutting tasks. The 57 CC engine of this Husqvarna chainsaw produces 3.7 horsepower, which effortlessly cuts trees, thick boards or debris.
How do you adjust the idle on a Husqvarna 350 chainsaw?
L Screw – With the chainsaw still running, take a screwdriver and turn the L screw clockwise. Keep turning it until the engine almost stops turning. Next, begin to slowly turn the adjustment screw counterclockwise until you hear the engine idling smoothly.
What is the T hole on a Husqvarna chainsaw?
The letter H stands for high speed, and this screw regulates the mixture when the saw is running at full speed, and you’re actually cutting something. The T screw regulates the mixture when the chainsaw is idling. All three screws have to be properly adjusted for the saw to work properly.
How much does a 350 Husqvarna cost?
The Husqvarna 350 is priced at an MSRP of $10,099.
What size bar does a Husqvarna 350 have?
Chainsaw Bar & Chain Combo Rplm fits Husqvarna 339 345 350 351 353 359 360 362 365 435 440 444 | 18″ Length . 325″x. 050″
What CC is a Stihl 066?
Engine Specifications The 066 uses a single cylinder two-stroke engine with a displacement of 91.6 cubic centimeters.
What was Leatherface real name?
Most notably, his real name has been changed thrice: in The Texas Chainsaw Massacre 2, his name was revealed to be Bubba Sawyer, but in the 2003 remake of the original film, it was changed to Thomas Brown Hewitt, and in Texas Chainsaw 3D, the character was renamed Jedidiah “Jed” Sawyer.
What CC is a Husqvarna 272?
Cylinder Displacement : 72.2 cc. Maximum Power Speed : 9300 RPM. Max engine/motor RPM : 13500 RPM. Idling Speed : 2600 RPM.
What does XP mean on Husqvarna?
XP® chainsaws have larger transfer ports, which carry. more fuel and air mixture, creating more acceleration. and torque where you need it.May 7, 2019
What CC is a Stihl 044?
The Stihl 044 chain saw has a single cylinder, two-stroke engine with a 70.7 cubic centimeter displacement. A 70.7 cc engine is equivalent to 4.31 cubic inches. The engine runs on a gasoline and oil mixture that is 50 parts gas to 1 part oil.
How many cc is a Husqvarna 562XP?
Husqvarna 562XP (20″) 59.8cc Professional Chain Saw, 3/8″ .
How many cc is a Husqvarna 365 special?
050″