41 inch chainsaw bar Related Question:
Whats the biggest bar you can put on a Stihl 881?
For the largest, toughest and most demanding jobs, professionals can find the performance they need in the MS 881 chainsaw. With its updated engine design and up to 41” guide bar length, the MS 881 is the largest, most powerful saw in the STIHL lineup.
What sizes do chainsaw bars come in?
The most commonly used chainsaw bar sizes are 11 ″, 12 ″, 13 ″, 14 ″, 15 ″, 16 ″, 18 ″, 20 ″, 21 ″, 22 ″. The smaller chainsaw bar size is used for simpler jobs. For example, a chainsaw with an installed bar of 11-13 inches is used as a delimber, and is also used to cut small non-thick boards.
What is the biggest bar you can put on a chainsaw?
Stihl’s electric saws come in three different sizes: the MSE 140 can handle a bar between 12 and 16 inches, the MSE 180 can take a bigger 18-inch bar, and the MSE 220 takes a bar between 16 and 20 inches. The little battery-powered MSA 160 is equipped with a 12-inch bar.
How do you measure a chainsaw bar length?
To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.
Will a Oregon bar fit a STIHL?
Chainsaw Bar & S55 Chain, Fits Various Stihl Models (105668) | Oregon Products.
What size bars does STIHL make?
STIHL guide bars range from 10″ (found on our tree-trimming pole pruners) to an incredible 59″ (used in extreme felling operations).
Can you put an 18 inch bar on a Stihl ms180?
Yes you can use any brand of bar and chains providing the mounting pattern suits the ms180 (3005 mount). You can also change gauge from .
How many cc is a 361 Stihl chainsaw?
59.0 cc (3.6 cu. in.)
Can you put a 14 inch bar on a Stihl MS170?
Stihl OREGON 14 inch chainsaw bar Fits Stihl MS170 – MS250 3/8 Pitch .
Can you put an 18 inch bar on a Stihl MS170?
Can you put an 18 inch bar on a Stihl MS170″? The short answer is that you cannot put an 18-inch bar on this chainsaw. This is because there are certain specifications regarding the guide bars that come with the chainsaw, and if you go beyond them, you may end up damaging your chainsaw.
How big of a tree can a 16 chainsaw cut?
16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.
How big of a tree can a 20 inch chainsaw cut?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What does DL mean on a chainsaw?
The drive link is the bottom part of the chainsaw chain (see picture below). Gauge measures the thickness of the drive links if you were to look at them along the length of the chain. Obviously, it is important to match the right chain gauge to the saw so that the chain will fit into the guide bar correctly.