They tell me that 58 thou chain is popular in Australia. “I’ve also noticed that perhaps some areas of the PNW prefer.063 gauge in 3/8” chain size. 50 or.58 the only size for.325 and 3/8 chain.
Designed for homeowners and occasional chainsaw users, the Oregon S58 AdvanceCut™ Saw Chain is a low-vibration, low-kickback chain featuring Chamfer Chisel cutters with twin cutting corners for outstanding performance. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3. “Saw chain sharpening kit with all the necessary components for maintaining the chain including one assembled 5/32″ file guide, two wooden file handles, one 5/32″ round file, one flat file and one.025” drop-center depth gauge tool.
58 gauge chainsaw chain Related Question:
Will a 058 chain fit in 050 bar?
050 and . 058 chains are identical except the drive tangs are reduced to .
Can a .058 bar run .050 chain?
058 bar? You will not be able to make a straight cut to save your life. The chain will rock in the bar and accelerate the wear.
Does gauge matter on chainsaw chain?
The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links. Thicker drive links are usually stronger, but they are heavier. Weight affects performance, and to maximize cutting speed, weight should be kept to a minimum.
What is the gauge of a chainsaw blade?
There are four different gauge sizes, which are . 043, 0.50, . 058, . 063, with the lower sizes being the most common.
Can I use a different gauge chain?
Drive sprockets can drive any gauge chain, only the pitch matters.
What is the difference between full chisel and semi chisel?
The sharp corner of the full chisel cutters split wood fibers easily and provides the fastest, most efficient cutting in clean softwood. The corner of the cutters on a semi-chisel saw chain are slightly rounded.
What size chain is on my Stihl chainsaw?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
What is a 3/8 pitch chain?
If you decide to measure the pitch yourself, just remember to measure between the middle points of 3 rivets on the chain, and then divide the number by 2. So, for a 3/8″ pitch chain, the measurement between three links would be 3/4″ (. 75″), which is 3/8″ (. 375″) when divided by 2.
Can you use different pitch on chainsaw?
The pitch is the distance between the drive teeth on the chain and the spacing of the spurs on the sprocket. Different pitch chains are not interchangeable. The three common chain pitch sizes are 3/8″ lo-pro, . 325 and 3/8.
Can you change the pitch on a chainsaw chain?
Yes, pitch does matter. If you change to . 325 chain you will also need to change the drive sprocket. If the saw has a floating rim then just change that, otherwise it is a new drum which may not be available.
Does skip tooth chain cut faster?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
What is the fastest cutting chainsaw chain?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.