When felling trees 6 to 30″s a longer bar is just in the way. Just like the dogs, they were the first thing i took off a new saw. When bucking up all the dogs do is hang your saw up.Even the Ole Lighting Stihl i had in 68 had a 16″ bar. Used a Mac 1000/ Partner p-100 with a 32″ and a souped Stihl 038 mag with a 24″.The 72 cc Stihl did better than the 99 cc Partner.The latter needs some attention it would appear. I’ve been saving the good saw logs because it they ever come back it will take 150 years before they ever reach this size again. Most of the oaks,red or white are about the same amount of usable wood.There are a few giants left but very rare. A sharp tooth can only cut so much wood before it has to be sharpened. Hypothetically, 2 teeth, twice as much before it needs sharpening. An 18″ bar will not cut as much wood as a 36″ bar before before needing the same sharpening. A good 70cc saw should pull at least a 28″ bar…. IMO. You can get away with a longer bar on a saw if you run a skip chain.
Mcculloch pro mac 700 with 28″ bar and chain 70cc chainsaw. Mcculloch pro mac 700 with 28″ bar and chain 70cc chainsaw with electronic ignition. PicClick Insights – mcculloch pro mac 700 with 28″ bar and chain 70cc chainsaw PicClick Exclusive Popularity – 3 watching, 1 day on eBay.
70cc chainsaw 28 inch bar Related Question:
How many cc is a 28 inch bar?
Husqvarna 966 73 31-13 572XP 28-Inch 70.6cc Professional Gas Chainsaw, 3/8-Inch . 063-Inch.
Whats the biggest bar you can put on a 572XP?
Max bar length is listed at 28″, same as 562.
Does bar length matter on chainsaw?
Not every bar or chain is right for every saw. For example, larger chainsaw bars work best with more powerful saws because it takes more energy to drive a chain around a long bar. That’s why electric saws use bars 18″ and shorter. Similarly, chainsaw chains are measured to fit certain bars.
What length bar is best for chainsaw?
A 16 to 18-inch bar should be enough to get the job done. This longer bar length will also work for cutting down small trees or removing shrubs.
What cc chainsaw do I need?
Your work will determine the type of chainsaw you purchase. Heavy work: If the task requires long hours felling trees, consider a professional chainsaw powered with a 65 to 110 cc engine and a guide bar of 16 to 20 inches. Moderate work: Cutting logs for firewood only needs a 55 cc engine with a 16 inch guide bar.
How big of a chainsaw do I need for a 36 bar?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
How big of a bar can I put on my 455 rancher?
Re: Husqvarna rancher 455 w/24″ bar – durability? If you really want to break that monster down with a 20″ bar, you can. Just take a bit of cunning, and work. Make a vertical cut into the end of the log, about 19″ from the side, as far in as the bar reaches.
How big of a bar can I put on a Husqvarna 61?
Cutting Equipment The Husqvarna 61 can be outfitted with bars 15 to 20 inches in length. Using a longer bar, like the 20-inch bar, will allow you to cut wider trees than using shorter bars.
How big of a tree can a 16 chainsaw cut?
16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.
What is the most common chainsaw size?
Most residentially used chainsaws fall between 16 and 24 inches of bar and chain length, and are supported by 32 to 62cc engine displacements (although 62cc is on the high end for most property management purposes).
Can you put a bigger bar on chainsaw?
Stihl’s electric saws come in three different sizes: the MSE 140 can handle a bar between 12 and 16 inches, the MSE 180 can take a bigger 18-inch bar, and the MSE 220 takes a bar between 16 and 20 inches. The little battery-powered MSA 160 is equipped with a 12-inch bar.
What bar length do I need?
Measure the bar from end to end to find its true length. For example, if the measurement is 16 1⁄3 inches (41 cm), then the true length of the bar is 16 inches (41 cm). Standard chainsaw bar lengths are between 8–24 inches (20–61 cm). The true length of the chainsaw bar will always be longer than the cutting length.
What chainsaw has the most CC?
The world’s most powerful production chainsaw. A direct replacement of the MS 880, the MS 881 is the most powerful chainsaw in the market with the highest displacement (121.6 cc) and engine power (6.4 kW). Built for high performance work, this saw is the optimum choice for professional foresters and loggers.
What size chainsaw do I need to cut firewood?
Many homeowners find that a 14- to 16-inch chainsaw is a good length for them. That’s long enough to limb-up trees, cut down small trees, and cut most firewood, but it’s also short enough that it’s easy to control the saw.
What makes a chainsaw powerful?
A more powerful saw will require a gas motor, while a less powerful, more mobile one can be driven by an electric motor. If you’ll be clearing trees from your property and converting them into firewood, then you’ll be well served to get an 18- to 24-in. bar and a gas-powered chainsaw.