“73JGX – OREGON SAW CHAIN FULL SKIP TOOTH 3/8” PITCH.058 GA. The ideal chain for high-production cutting of clean wood. Patented Chain Steel – OREGON OCS-01 steel is patented and provides greater durability, especially in cold cutting conditions. Sequence: FULL SKIP.WARNING: This chain may be capable of kickback that could result in serious injury to the saw operator or bystanders.
72 tooth chainsaw chain Related Question:
How long is a 72 drive link chainsaw chain?
0.050 Gauge 0.325 in. Pitch Chainsaw Chain, 72 Drive Links.
What is the fastest cutting chain for a chainsaw?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available.
What is the biggest chainsaw chain?
Oregon S62 AdvanceCut 18-Inch Chainsaw The Oregon S62 AdvanceCut chain is present in the 1st position in this article as it is the largest option present in this article. It has a chain length of 18 inches that is quite long.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
How do I know what size chain I need for my chainsaw?
To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.
Can you change bar length on chainsaw?
Replacing your chainsaw bar will require a few measurements. Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches.
Does skip tooth chain cut faster?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
What chainsaw chains do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
Why does my chainsaw go dull so fast?
With a single contact with the ground while running, a chainsaw can become very dull. This is because the ground contains sand and dust which is abrasive and contains a lot of tiny rocks. To avoid such occurrences, avoid cutting wood placed on the ground.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What chainsaw chain stays sharp the longest?
Husqvarna Chainsaw Chain 16″ . The x-Cut line of Husqvarna chains is also designed to stay sharp longer, so you can cut for a longer amount of time before the chain needs sharpening.
What is full chisel chain?
A full chisel chain is designed for the fast cutting action. In comparison to the semi-chisel chain, this chain has square-cornered teeth which makes it more aggressive when cutting.
What is a 3/8 chainsaw chain?
3/8″ low-profile chains typically fit chainsaws whose guide bars are 18″ or shorter in length, which are the majority of medium-use, non-professional application chainsaws such as a homeowner might own. .
What is a 404 chain?
404″ Pitch Harvester Bars & Chains 404″ Pitch Cutting System for its rugged endurance and unmatched ability to keep up with the extreme torque and RPM’s generated on modern equipment.