78 link chainsaw chain Related Question:
Does number of links matter on chainsaw chain?
Chainsaws are designed to use a specific size of bar with a specific chainsaw chain link count. For heavier jobs like felling trees or bucking logs, it might be better to have a longer chain with more links – but this will make it slower and less agile.
What does R56 mean on chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
What is the toughest chainsaw chain?
404 chains are the most aggressive. The 3/8 is a more flexible size with adequate strength, low weight and substantial cutting speed. It can also can handle the power of a 50-100cc chainsaw engine.
Is it better to have more links in a chainsaw chain?
The greater distance between links makes for more aggressive cutting. When a chainsaw chain’s pitch measurement is displayed on the tool, it is usually on the guide bar, towards the user-end of the tool. So, for a 3/8″ pitch chain, the measurement between three links would be 3/4″ (.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
How do I know what type of chain I have?
In most case the roller chain type is often stamped on the outer link plate; for example, 50 if ANSI or 10B if BS size. The first digits refer to the pitch of the chain and vary according to the series.
Can I use a .050 chain on .058 bar?
058 bar? You will not be able to make a straight cut to save your life. The chain will rock in the bar and accelerate the wear.
What size chain does a Dewalt 60V chainsaw use?
Our durable 16 in. Replacement Saw Chain is designed to fit 16 in. bars on the DEWALT® 60V MAX* Cordless Chainsaw (DCCS670). This low-vibration chain is designed to cut smooth and fast with minimum kickback.
What is difference between S56 and Y56 chains?
The S56 could replace a Y56 chain. The difference in the 2 is not significant. The Y indicates that it would have less vibration than other chains. 4 of 4 found this helpful.
Will a Oregon chain fit a Craftsman chainsaw?
Oregon S62 AdvanceCut Chainsaw Chain for 18-Inch Bar -62 Drive Links – low-kickback chain fits Husqvarna, Echo, Poulan, Craftsman, Echo and more.
What chainsaw chains do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What chainsaw chain do professionals use?
Typically only professionals and experienced chainsaw users use full chisel chainsaw chains. They are typically used to cut through hardwood such as oak as their square-cornered cutting teeth are more geared up to power through the wood.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
What does pitch mean on a chainsaw chain?
Pitch. Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches – 1/4″ is the smallest, 3/8″ is the most popular, and 3/4” is the largest.