‘Chainsaw kickback’ is a phrase that is used when discussing operating chainsaws. To ensure absolute safety, it is extremely important to ensure you’re well versed in what it means and how to handle it. To fully prepare for chainsaw kickback you first need to understand what it is, how it happens and how to avoid it.
The reason it has this name is that the chainsaw tip is the most common part of the chainsaw that can cause a kickback. If you’re cutting with a chainsaw and the wood closes around the chain tightly, it can cause a chainsaw kickback to occur. Chainsaw kickback is the most common type of chainsaw injury that people encouter.
Below, we’ll explain chainsaw kickback as well as the kickback zone, causes of kickback, preventive measures, and how to avoid kickbacks in the first place altogether. Chainsaw chaps are preferable because they are chainsaw resistant and are also specially designed to protect the left side of your leg, which is another prime target for a kickback. There are many ways to avoid a potential chainsaw kickback.
Kickback is the term to describe the unexpected upward motion of the guide bar. Kickback – the rapid upward motion ofh te guide bar that can occur when the saw chain, near the nose of the top area of the guide bar, contacts an object such as a log or branch, or the backwardm otion that can occur when the wood closes in and pinches hte saw chain in the cut. The most common and probably most violent kickback occurs when contact is made, either accidentally or intentionally, in this “Kickback zone.” In some cases the blade tip may move upward and back toward the operator who could suffer a very serious or fatal injury.
what causes chainsaw kickback Related Question:
How often does chainsaw kickback happen?
Kickback can happen in the blink of an eye too. In fact, about 30,000 chainsaw-related injuries happen each year, with chainsaw kickback accidents being the most common hazard.
Why do chainsaws buck?
If a log is not sitting firmly on the ground when you cut, the downward force can cause the log to close up on your chain. Pinching of the blade is more likely to occur when you’re cutting from the top down.
How do most chainsaw accidents happen?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Do chainsaws do Kickbacks?
Don’t feed the stock too fast into the band-saw blade. If you do, the blade will chatter, cutting unevenly. (Don’t go too slowly, either, or the blade will tend to burn the workpiece.) There’s essentially no risk of kickback, however, as the motion of the blade tends to drive the work-piece against the worktable.
What should you not do with a chainsaw?
Don’t Cut With Improper Blade Tension A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. The drive links should still be in the bar groove. If the links come out of the bar, the chain is too loose.
What is bucking chainsaw?
The process of cutting a tree into usable lengths is called bucking. Bucking often occurs as a tree is being limbed, such as when the limbs of the crown are to be used as firewood.
Can you cut with the top of a chainsaw?
While it’s designed to cut with either the top or bottom of the blade, just about anything that comes in contact with the top half of the end tip of the blade (known as the kickback zone) can change the cutting momentum and cause the saw to slam back against you.
What can prevent kickback from timber binding?
The best cure for kickback is to deny the wood access to the back of the blade. A splitter, especially a riving knife, is by far the best protection you can give yourself. Double-check all your setups and plan your cuts carefully.
What is an anti kickback shoulder on a saw blade?
Anti-Kick Saw Blades Saw Blades with anti-kickback shoulders that limit the amount of material that can safely be cut by each tooth. This virtually eliminates the kickback caused by overfeeding. Also called safety saw blades.
What is a wood kick back?
Kickback is the term for wood that suddenly and without warning is propelled back towards the operator at a high rate of speed.
Should you flip your chainsaw bar?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
How many people are killed by chainsaws every year?
They can also quickly cause severe injury or death. According to the Centers for Disease Control and Prevention (CDC), approximately 36,000 people are injured by chainsaws annually.
What is the most common chainsaw injury?
More than 36 percent were injuries to the legs and knees. Approximately 40 percent of all chainsaw accidents occur to the legs and well over 35 percent occur to the left hand and wrist.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.
Why do chainsaw chain dull so quickly?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.