The original chainsaw was invented and used by two Scottish doctors in the 1780s. Interestingly, it’s also the first Stihl chainsaw because the first wood chainsaw was invented by Andreas Stihl – the founder of the Stihl chainsaw company. Stihl also claims to have invented the first chainsaw for use by one person in 1950 – check out all the Stihl chainsaw years made for more info.
The modern-day chainsaws we’re used to seeing are mainly utilised for tree cutting. Shockingly, the chainsaw was originally invented to assist in childbirth – yes, you read that correctly. The doctors’ chainsaw was used during symphysiotomies.
The original chainsaw looked more like a modern-day kitchen knife than what we would call a chainsaw nowadays. In the 1780s, in a bid to make the removal of the pelvic bone easier and less time-consuming two doctors named John Aitken and James Jeffray invented the chainsaw. In 1883, a patent for a chainsaw for cutting boards was passed and then subsequently more and more chainsaws developed.
chainsaw what oil mix Related Question:
What kind of oil do you use in a chainsaw mix?
Most 2-stroke chainsaws recommend a 50:1 chainsaw oil mix ratio. But some recommend 40:1. Older two-stroke equipment might even call for 32:1.
Can I use motor oil in my chainsaw?
While motor oil is not the best substitute for chainsaw bar oil, it will work as a temporary measure if find you have no other option. The downside of motor oil is that it’s not sticky enough to stay on the bar and chain. So, when you’re using the chainsaw, the motor oil will fling off as you cut and make quite a mess.
What is the oil to gas mixture ratio for a chainsaw?
For a 50:1 ratio of gas to oil, use 2.6 fluid ounces of oil per gallon of gas. For a 40:1 mixture, use 3.2 fluid ounces of oil per gallon of gas. For a 32:1 mixture, use 4 fluid ounces of oil per gallon of gas.
Can I use 2 stroke oil as bar oil?
Can You Use 2 Cycle Oil As Bar Oil? You should only use two-cycle oil as the mix, never as a chainsaw bar oil alternative. Using two-cycle oil on the bar will not provide enough tackiness to stick to the chainsaw chain in the summer months. Two-cycle oil also will not work in the winter.
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.
What is the difference between chainsaw oil and motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Can you use 10w30 for bar and chain oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
What viscosity is chainsaw bar oil?
What viscosity is chainsaw bar oil? The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.
What is a 50 to 1 mixture?
While 50:1 ratio means 50 parts of gasoline to one amount of a 2-Cycle oil, about 2.6 ounces of oil for one gallon of gasoline. 50: 1 ratio is the standard ratio of oil mix used for 2-cycle engines used for working in home depots.
Do all chainsaws use mixed gas?
Nearly all gas chainsaws require a gasoline and oil mixture for their fuel. Chainsaw engines require a premixed fuel to keep them running at the proper temperatures. The oil that’s added to the fuel lubricates the piston and crankshaft, but it also keeps the engine cool enough to keep running.
What happens if you put too much 2-stroke oil?
Excess oil can produce a smoky exhaust, oil leaking out of the muffler, and sometimes loss of power. While not ideal, these issues can be fixed by simply replacing the fuel in the tank with properly mixed fuel.
What oil should I use in my 2-stroke?
LIQUID ENGINEERED FOR 2-STROKE MOTORCYCLES, SCOOTERS, ATVS AND LAWN EQUIPMENT. Castrol® 2T provides superior protection for 2-stroke engines. It is a mineral-based motorcycle oil designed for use in 2-stroke motorcycles, scooters, ATVs and lawn equipment. Castrol 2T is the go-to motor oil for 2-cycle engines.
What is special about 2-stroke oil?
A 2-stroke oil will lubricate the engine components by association with the fuel (either by mixing with it or by spraying during combustion), so this oil contains components that promote its combustion.
Do I use 2 stroke oil for chainsaw?
Modern two stroke chainsaws do not require generic brand oils to operate at temperatures and rpms that are comparable to those of generic brand oils. Our recommendation is to use only high quality two stroke oil designed for air cooled high performance engines when using your modern two-cycle engine.
Can you use transmission fluid for chainsaw bar oil?
On occasion I’ve used tranny fluid to clean out old oil residue in old chainsaws . It works well . In addition to that tranny fluid seems to pump better on some saws with whimpy oilers in cold weather .