Measure the distance between any 3 consecutive rivets that hold the chain assembly together. The rivets are noticeable between the drive links and the cutters – the cutting teeth that lie on top of the chain. The pitch, together with the number of drive links, describes the chain’s length when seeking replacement chains.
Find the gauge of the chain by locating the number stamped on the drive link. A 1 equals a 0.043-inch gauge, 3 equals a 0.050-inch gauge, 5 corresponds to a 0.058-inch gauge, 6 means the chain has a 0.063-inch gauge. A 0 means the chain has a 0.080-inch gauge, but this gauge size is found only on the Harvester chain.
“Using the wrong size bar or chain can damage the chainsaw and injure the chainsaw operator,” says Vince Christofora of Woodstock Hardware. Read on to learn how to measure your chainsaw’s bar and chain. Sometimes called a chainsaw blade, the chainsaw bar is the metal “Arm” that holds and supports the chain during cutting.
how to measure chainsaw chain stihl Related Question:
How can I tell what size my Stihl chain is?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.
How do I know what size my chainsaw chain is?
To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.
What do the numbers on a Stihl chain mean?
The Stihl chainsaw scale Each model number contains three sections: MS, MSA, or MSE + numbers + letters. Let’s start with MS, a straightforward one to explain. MS stands for Motorsäge (chainsaw in German), and MSA means it is a battery chainsaw, while MSE indicates it is an electric chainsaw.
Whats the difference between green and yellow Stihl chains?
Others will chime, looks like green is homeowner (and dirty condition) safety chain. That stays sharper longer in dirty conditions. The yellow looks like full chisel, cuts faster but dulls quicker. I like full chisel and just keep it sharp.
What chains can I use on a Stihl chainsaw?
Stihl manufacturers replacement parts, including chains, as well as chain saws. Stihl recommends using its own chains as replacements, but after-market manufacturers produce similar chains that may be used on a Stihl chain saw.
What does 6 mean on chainsaw chain?
The number 6 on the cutter tells us the pitch is 3/8 lo pro or (picco) and the number 3 on the drive link indicates a gauge of . 050″ (or 1.3mm).
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
How do I know what size chain to buy?
After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.
Does chain length include clasp?
Measure the length with a ruler or tape measure. Do not forget the clasp in your measurement. The complete chain, including the clasp, should be measured because that is what determines how long it hangs. Do not include the length of any charm or pendant hanging from the chain.
How do you measure a gold chain?
Take your necklace length (measured from one end of the clasp) and add it together with your neck circumference measurement. Then, you can determine how long or short a chain you should wear around your neck by using this formula: Length of your necklace + length around your neck = proper chain length for you to wear.
What is a good size chain for a man?
What is a good size necklace for a man? For most men shopping for a chain necklace, get one that is 50 cm (20”) in length and 2-6 mm in width. If you’re adding a pendant, shop for a 55-60 cm (22-24”) necklace and 4-6 mm width.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
Are STIHL chains better than Oregon?
Stihl chain hold their edge a bit longer than Oregon, but they also slightly harder to file. It is hardly noticable during normal maintnance (touch up before it gets dull), but obvious during more extended filing. I prefer Stihl when I have the option.