72.John DeereNotesBar LengthReplacement Chain SizeNumber of Drive Links8, 9, 61, 81, 91Chain length may vary depending on make of bar. 78.2036, 2040Some models used 3/8″.050 chain. “Models with chain brakes use 3/8” low profile chain.
what size chainsaw for chainsaw mill Related Question:
What size chainsaw do I need for chainsaw mill?
What size chainsaw should I use for milling? Go with a chainsaw that can handle a bar that is at least 3 inches longer than the width of the log you’ll be milling. Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment.
Can you mill with a 60cc chainsaw?
A 24″ bar is too much for a 60cc saw crosscutting, never mind ripping. Torque and lots of it is required for milling, even with that it is still hard work for the operator and the saw.
Can you mill with a 50cc chainsaw?
Re: Need Advice Concerning the Alaskan Chainsaw Mill The short answer is Yes.. you can do it with a 50cc saw but you will kill it pretty fast.
What CC is Alaskan mill?
What are my power needs? In general, you will need at least 50cc to run our smallest mill (G777). The more powerful your saw, the easier your milling experience is going to be.
Does a ripping chain cut faster?
Ripping chains are slower as the finer cut and surface takes more time than regular cutting.
Is chainsaw milling worth it?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
Can you mill with a 460 rancher?
As I’ve stated before, milling is the toughest task you will put your chainsaw through and having that power is great. But the Husqvarna 460 rancher also has its strong points, and one of the biggest is it won’t wreck your wallet.
How long does it take to mill a log with a chainsaw?
In the world of chainsaw milling, the more powerful the saw the better. You can mill with a smaller saw; however, it’s going to be really slow. On average, it takes me about 10-15 minutes to make one cut using my saw, based on the size logs that I typically cut. Expect that a smaller saw will cut slower.
What CC is a Stihl 066?
Engine Specifications The 066 uses a single cylinder two-stroke engine with a displacement of 91.6 cubic centimeters.
What is a ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
How big is an Alaskan mill?
The Alaskan Mill Mrk III comes in 7 sizes; 24″, 30″, 36″, 48″, 56″, 60″ and 72″ and all of them will clamp on any size chain saw bar (except one shorter than 5″ and some narrow bars). When attaching the mill to your chain saw, you will lose 2″ to 4″ of width of cut over whichever is shorter, your bar or the mill.
Who makes Huyosen chainsaw?
HUYOSEN Trademark of YONGKANG TUOER TRADING CO., LTD – Registration Number 6000794 – Serial Number 88531773 :: Justia Trademarks.
What chainsaw do loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
What size saw do loggers use?
Since you’re buying a professional chainsaw, you should look out for nothing less than 40CC and 1 HP engine power. Chainsaws with more engine power will be more powerful than those with less engine size. Those chainsaws with an engine size of 40 to 80 CC are often used by loggers that have to fell a lot of trees.
Is a full chisel chain the same as a ripping chain?
In reality ripping chain is a semi or micro chisel chain filed to 10 degrees rather than 30 degrees. Full chisel filed to 10 degrees tends to cause a lot of vibration when cutting planks with a chainsaw although some people do find a chisel cutter is better in certain woods.