In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch. A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain.
It is recommended to avoid using a chainsaw in the dirt to prevent the blade from dulling with flying debris, prevent the chains from wearing out or losing lubrication, and avoid dirt from entering the motor. While using a chainsaw in the dirt will not guarantee damage upon initial contact in every cutting session, the risk of damage because of consistent exposure should prevent you from using it in these conditions. If the wood is too large or heavy to prop up, using other tools to accompany your chainsaw and monitoring your cut can save your chainsaw and get the job done.
In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch. Dirt, soil, rocks, anything not wood, should not be cut by a chainsaw or planer, if at all possible. When a chainsaw chain is sharp, it cuts through anytime easily and without any efforts.
Although there would be no damage on initial contact with dirt, any exposure to dirt during cutting can dull your machine’s cutting chain. While cutting through a log, the rotating chain is bound to hit the dirt once it cuts through the log. Due to a fast-rotating chain, a chainsaw would be extremely messy for use in dirt.
Read on for an in-depth look at how dirt dulls a chainsaw chain, plus some handy tips on keeping dirt out of your chain. It dulls your cutters, wears out your chain links, and stretches your chain. Unless you’re a professional who’s been using a chainsaw for years, getting dirt in your chain is inevitable.
what happens if chainsaw hits dirt Related Question:
What should you not do with a chainsaw?
Don’t Cut on the Ground When Using a Chainsaw Cutting on or near the ground puts you at risk for sinking the bar into the dirt. When learning how to use a chainsaw safely, one of the first things you should do is make sure to make your cuts off the ground.
Can a chainsaw cut roots in dirt?
Chainsaws are strong equipment that dirt won’t damage or lose its chain. Keep in mind that some timber might be left beneath the earth. Large roots can also be taken out by cutting vertically into the ground and then pulling out with a shovel or pickaxe.
How do you clean dirt off a chainsaw?
In a well-ventilated area, take a bucket and mix one cup of ammonia with one gallon of water. Place the chainsaw chain in this solution and let it soak for 15 minutes. Put on a pair of thick rubber gloves for protection. Then, use a soft-bristled toothbrush to scrub each section of the chain until it’s free of debris.
Does it hurt a chainsaw to get wet?
Does this pose any risk to your chainsaw? In all honesty, no! The additional moisture found on wet wood will not make any difference to the cutting process. It doesn’t place any additional resistance on the chainsaw, and no additional effort is required to cut through it.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.
Can you use a chainsaw to trench?
Chainsaws can be modified to handle tasks like trenching, but the modifications will decrease the lifespan and performance of your saw. Many people use their chainsaws for digging trenches because it is an easy way to cut through dirt or other types of material without having to utilize any additional tools.
What will cut through tree roots?
Mr. Tree Services experts say that gardening shears can work well. Alternatively, you might use a shovel or spade, branch cutters or loppers, a mattock or hoe to dig out the soil, and an axe or even a saw.
Can I chainsaw roots?
Both manual and chain saws can cut through roots of any size. Use a shovel to dig out the area around large roots, as the soil will clog the space between the saw teeth and make it harder to cut.
Can I use WD40 to clean chainsaw?
Step 4: Clean the Chain We recommend using WD-40® Specialist® Fast Acting Degreaser and soak it for 10 to 15 minutes. Next, use a wire brush to remove all the grime (repeat several times) and wipe with a paper towel to make sure all the dirt is gone.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Why does my chainsaw get dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Is it OK to cut wet wood with a chainsaw?
Can you cut wet wood with a chainsaw? Yes, you can cut the wet wood with a chainsaw. Besides, there is a misconception that wet wood can impact the chainsaw bar and chain. But actually, the damp wood will not dull the chainsaw any faster than using it on other types of wood.
Where do most chainsaw injuries occur?
Approximately 40 percent of all chainsaw accidents occur to the legs and well over 35 percent occur to the left hand and wrist.
Do you need to break in a chainsaw?
Typically we recommend a break in period of 6-10 tanks of fuel. During this period the engine should not be allowed to run at high RPMs for extended periods of time.