In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch. A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. Why burn up a perfectly good chain saw just because you’re too impatient to wait for it to cool off? The heat from a hot engine vaporizes the fuel as you pour it into the tank. Cutting with a sharp blade actually extends the life of your chain saw. Even with stabilized gas, most chain saw manufacturers recommend emptying the tank and running the carburetor dry before storing the machine. Replacement filters are cheap, a new chain saw engine isn’t!
It is recommended to avoid using a chainsaw in the dirt to prevent the blade from dulling with flying debris, prevent the chains from wearing out or losing lubrication, and avoid dirt from entering the motor. While using a chainsaw in the dirt will not guarantee damage upon initial contact in every cutting session, the risk of damage because of consistent exposure should prevent you from using it in these conditions. If the wood is too large or heavy to prop up, using other tools to accompany your chainsaw and monitoring your cut can save your chainsaw and get the job done.
In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch. Dirt, soil, rocks, anything not wood, should not be cut by a chainsaw or planer, if at all possible. When a chainsaw chain is sharp, it cuts through anytime easily and without any efforts.
Although there would be no damage on initial contact with dirt, any exposure to dirt during cutting can dull your machine’s cutting chain. While cutting through a log, the rotating chain is bound to hit the dirt once it cuts through the log. Due to a fast-rotating chain, a chainsaw would be extremely messy for use in dirt.
Read on for an in-depth look at how dirt dulls a chainsaw chain, plus some handy tips on keeping dirt out of your chain. It dulls your cutters, wears out your chain links, and stretches your chain. Unless you’re a professional who’s been using a chainsaw for years, getting dirt in your chain is inevitable.
what happens when a chainsaw hits dirt Related Question:
Can you use a chainsaw to cut roots in dirt?
Yes, chainsaws are powerful machines, and you don’t have to worry about dirt damaging it or knocking the chain off. Remember, you can leave some wood below the dirt. Also, you can cut large roots out by sawing into the ground vertically, and then by prying the root out with a shovel or pickax. In the ground?
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Will dirt mess up a chainsaw?
Dirt contains various hard particles that are harder than the chain’s steel. As a result, it can dull the sharp chain cutters and affect its performance.
What should you not do with a chainsaw?
Don’t ever run while carrying a chainsaw. Do try to avoid cutting with the blade tip, this will also help avoid kickback. Do try cut below shoulder height wherever possible. This will keep a chainsaw away from your face in the event of kickback.
Can you use a chainsaw to trench?
Chainsaws can be modified to handle tasks like trenching, but the modifications will decrease the lifespan and performance of your saw. Many people use their chainsaws for digging trenches because it is an easy way to cut through dirt or other types of material without having to utilize any additional tools.
What will cut through tree roots?
Mr. Tree Services experts say that gardening shears can work well. Alternatively, you might use a shovel or spade, branch cutters or loppers, a mattock or hoe to dig out the soil, and an axe or even a saw.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Will dirt dull a chainsaw blade?
Nobody plans to run their chain saw into dirt. But when you cut close to the ground, you’re just begging for a quick dip into dirt, rocks and crud. All it takes is a second in the dirt to dull the cutters. In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch.
Does dirt dull a AXE?
Don’t put your axe away dirty or wet, dirt and moisture accelerate corrosion. Use an oil to protect your axe head.
Does charred wood dull a chainsaw?
Re: Cutting burnt wood From my limited experience, it dulls chain fast. If you have a lot to do, then Bailey’s sells chain to cut in dirty conditions.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
Can I use a chainsaw to cut roots?
Chainsaws are strong equipment that dirt won’t damage or lose its chain. Keep in mind that some timber might be left beneath the earth. Large roots can also be taken out by cutting vertically into the ground and then pulling out with a shovel or pickaxe.
How much root damage can a tree take?
If enough of the root system is destroyed or detached, the tree will die. As a general rule, 20% of the root system can be destroyed before the tree will show signs of injury. If 40% of the root system is lost, the tree will probably die.